Overview
The evaluation tool enables control of the ZCU208 and ZCU216 RF DC IPs (see Zynq UltraScale+
RFSoC RF Data Converter LogiCORE IP Product Guide (PG269)) and associated designs from a host
computer. The tool allows the exploration of RF configurations, generation and capture of RF
data, and observation of key RF metrics.
The following figure shows the evaluation tool and test platform overview.
The tool is built from these components:
• ZCU208 Evaluation Board User Guide (UG1410)
• ZCU216 Evaluation Board User Guide (UG1390)
• FPGA hardware design (see
• FPGA embedded software design (see
• GUI (see RF Data Converter Interface User Guide (UG1309))
UG1433 (v1.2) October 27, 2021
RF Data Converter Evaluation Tool User Guide
Figure 1: Evaluation Tool and Test Platform Overview
Chapter 3: Hardware
Chapter 4: Software Design and
Design)
Build)
Send Feedback
Chapter 2: Overview
Chapter 2
X24062-062220
www.xilinx.com
6