Drive Unit; Removing The Drive Units - Permobil Explorer Mini Service Manual

Explorer Mini
4.12

Drive unit

4.12.1

Removing the drive units

The following tools are necessary for this task:
• Torque wrench.
• Allen socket, 3 mm.
• Allen socket, 4 mm.
1. Remove the top cover. For instructions, see
4.6.1.1 Removing the top cover .
2. Remove the bottom cover. For instructions, see
4.6.2.1 Removing the bottom cover .
3. Remove the drive wheels. For instructions, see
4.7.1 Removing the drive wheels .
4. Press the latches on the connector of each drive unit and disconnect
the cable to each drive unit from the nVR2 power module.
5. Remove the cable for each drive unit from the cable holders.
6. Loosen the screw on the wheel hub for each drive unit. Do not
remove the screw.
Repairs - Drive unit
Figure 119. Disconnect the drive units from the nVR2
power module.
Figure 120. Remove the cables from the cable holders.
Figure 121. Loosen the screw on the wheel hub.
63