Permobil Explorer Mini Service Manual page 45

Explorer Mini
11. Remove the four screws and washers from the table bracket.
12. Separate the table bracket from the column (approximately 10") and
pull out the cable pulley assembly from the column.
13. Remove the two screws from the cable holder on the column,
remove the cable holder from the column and remove the cable
holder from the cable to the control panel.
14. Pull out the cable to the control panel from the column.
15. Pull out the cable to the control panel from the cable pulley
assembly.
Repairs - Control panel
Figure 84. Remove the table bracket.
Figure 85. Pull out the cable pulley assembly.
Figure 86. Remove the cable holder from the column.
Figure 87. Pull out the cable to the control panel from
the cable pulley assembly.
45