Permobil Explorer Mini Service Manual page 29

Explorer Mini
4.6.1.2 Installing the top cover
The following tools are necessary for this task:
• Torque wrench.
• Allen socket, 2.5 mm.
• Allen socket, 4 mm.
• Slotted screwdriver or pliers.
1. Put the top cover on the base module.
2. Pull the cable from the nVR2 power module through the hole at
the front of the top cover.
Repairs - Base module
Figure 46. Put the top cover on the base module.
Figure 47. Pull the cable from the nVR2 power module
through the hole.
29