Permobil 2 Series Owner's Manual
  1. Manuals
  2. Brands
  3. Permobil Manuals
  4. Mobility Aid
  5. 2 Series
  6. Owner's manual
Permobil 2 Series Owner's Manual

Permobil 2 Series Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ZR
Owner's Manual
Dealer/Supplier
This manual must be given to the user of this wheelchair
Operator (Individual or Caregiver)
Before using this wheelchair, you must read this manual in its
entirety and save it for future reference
Serial Number___________________________________________
Customer Service +1-800-545-2266

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2 Series and is the answer not in the manual?

Questions and answers

Related Manuals for Permobil 2 Series

Summary of Contents for Permobil 2 Series

  • Page 1 Owner’s Manual Dealer/Supplier This manual must be given to the user of this wheelchair Operator (Individual or Caregiver) Before using this wheelchair, you must read this manual in its entirety and save it for future reference Serial Number___________________________________________ Customer Service +1-800-545-2266...
  • Page 2 DEPARTMENT OF TRANSPORTATION HAS NOT APPROVED ANY TIE-DOWN SYSTEM FOR TRANSPORTATION OF A USER WHILE IN A WHEELCHAIR IN A MOVING VEHICLE OF ANY TYPE. IT IS PERMOBIL MANUAL’S POSITION THAT USERS OF WHEELCHAIRS SHOULD BE TRANSFERRED INTO APPROPRIATE VEHICLE SEATING FOR TRANSPORTATION AND SHOULD USE THE RESTRAINTS MADE AVAILABLE BY THE AUTO INDUSTRY.

  • Page 3: Table Of Contents

    I. AXLES .......................... 1-11 J. PNEUMATIC TIRES ....................1-12 K. REAR WHEEL LOCKS ....................1-12 L. PUSH HANDLES ......................1-12 M. FASTENERS ......................1-13 N. POWER DRIVE ......................1-13 O. UNAUTHORIZED PARTS AND ACCESSORIES ............1-13 Permobil ZR Owner’s Manual OM0005-ENGLISH_Rev E_ZR...
  • Page 4 Adjusting the Backrest Height .................... 4-2 Replacing the Backrest ...................... 4-3 BOLT-ON PUSH HANDLES ......................4-4 Mounting ..........................4-4 Removing ........................... 4-5 ADJUSTABLE HEIGHT PUSH HANDLES ..................4-5 Mounting ..........................4-5 Removing ........................... 4-6 Permobil ZR Owner’s Manual OM0005-ENGLISH_Rev E_ZR...
  • Page 5 Adjusting the Tension ......................7-4 Replacing the Upholstery ....................7-5 SEAT CUSHIONS ......................... 7-5 VELCRO -STYLE ADJUSTABLE SEAT BELT ................7-6 ® Installation .......................... 7-6 Adjustment ......................... 7-7 Safety Check ........................7-7 Maintenance ........................7-7 Permobil ZR Owner’s Manual OM0005-ENGLISH_Rev E_ZR...
  • Page 6 GLIDE FORKS ..........................11-4 Replacing Casters - Standard Forks ................11-4 Replacing Casters - Slipstream Single-Sided Forks ............11-4 Replacing the Elastomer ....................11-4 Replacing Glide Forks - Standard and Slipstream Single-Sided ........11-5 Permobil ZR Owner’s Manual OM0005-ENGLISH_Rev E_ZR...
  • Page 7 Adjusting .......................... 13-4 Removing ......................... 13-4 Mounting .......................... 13-4 CHAPTER 14: TRANSPORTATION OPTIONS 14-1 ............ GENERAL WARNINGS ....................... 14-1 INTRODUCTION ......................... 14-2 SECURING THE WHEELCHAIR TO THE VEHICLE ..............14-2 WARRANTY MODIFICATION ..................... 14-3 Permobil ZR Owner’s Manual OM0005-ENGLISH_Rev E_ZR...
  • Page 8 All features may not be available with some device setups or in conjunction with other device features. Please consult your supplier for more information. Your authorized supplier can also provide you with information on accessories. Permobil ZR Owner’s Manual OM0005-ENGLISH_Rev E_ZR...

  • Page 9: General Warnings

    BEFORE using the chair. 3. ALWAYS have your chair completely inspected and serviced by an authorized Permobil supplier at least once a year. 4. ALWAYS perform your safety inspections and any maintenance or adjustments while the chair is unoccupied (unless this Manual expressly states otherwise).

  • Page 10: Changing/Adjusting Your Wheelchair

    WARNING 1. Riding your Permobil Manual wheelchair on wet, icy or other slick surfaces increases the risk of losing control of the wheelchair or tipping over. Use extra care if you must ride your chair on any such surface. If you have any doubt about your ability to negotiate a particular surface, ALWAYS ask for assistance.

  • Page 11: Motor Vehicle Safety

    The additional weight could exceed the weight limit for the chair and damage the chair. If you intend to engage in weight training, Permobil Manual recommends that you utilize weight training equipment with built-in seating and that you transfer to that seating rather than using your chair.

  • Page 12: Warnings For Safe Use Of Your Wheelchair

    B. CLIMBING A FLIGHT OF STAIRS WARNING DO NOT climb a flight of stairs with the user in the wheelchair. However, Permobil Manual recognizes that wheelchair users may, on occasion, have no other choice. Only if you have no alternative, you should follow these steps to climb up a flight of stairs. 1. NEVER attempt to negotiate more than one step unless you have two (2) able-bodied adult assistants.

  • Page 13: Descending A Flight Of Stairs

    WARNING Most falls or tip-overs occur when you go beyond the center of gravity of you and your wheelchair. Permobil Manual wheelchairs are designed to remain stable and upright in normal daily use and activities so long as you do not exceed the center of gravity.

  • Page 14: Transferring In And Out Of Your Wheelchair

    However, using a Permobil Manual seat pouch beneath the seat sling to carry heavier items will lower your center of gravity and reduce, but not eliminate, your risk of a tip-over.

  • Page 15: Bending/Leaning/Reaching

    12. ALWAYS rotate the casters until they are trailing forward. This will make the chair more stable. NOTE: To get your casters to trail forward, first move your chair forward past the object you want to reach and, second, back up alongside the object. By moving backward, your casters will rotate and trail forward. Permobil ZR Owner’s Manual OM0005-ENGLISH_Rev E_ZR...

  • Page 16: Obstacles

    ALWAYS make sure it complies with local legal requirements. F. ESCALATORS WARNING NEVER use your wheelchair on an escalator, not even with an assistant or attendant. Permobil ZR Owner’s Manual OM0005-ENGLISH_Rev E_ZR...

  • Page 17: Assistants And Attendants

    Permobil Manual also offers a limited number of seat cushions manufactured by other manufacturers. However, the selection of any of these products is a decision to be made by you and your doctor or therapist. Permobil Manual has NO information about your medical condition and assumes no responsibility should you choose the wrong seating system for your medical needs.

  • Page 18: Upholstery Fabric

    1. If you add a seating system to your Permobil Manual chair, you will affect its center of balance. This may cause the chair to tip over. Therefore, NEVER install a new seating system on your own. Instead, have it installed by an authorized Permobil Manual dealer who can assist you in making other necessary adjustments to ensure your center of balance is maintained as closely as possible to what you are used to.

  • Page 19: Armrests

    Stainless quick-release axles are a standard Permobil Manual wheelchair component. Other axle types are optional equipment. All Permobil Manual axles are designed to make your rear wheels easy to remove quickly. However, if not used properly, they can be dangerous.

  • Page 20: Pneumatic Tires

    Standard rear wheel locks are available on all Permobil Manual wheelchairs as a no-charge option. Scissor locks and uni-locks are optional equipment. Permobil Manual wheel locks are NOT designed to slow or stop a moving wheelchair - they are NOT brakes. Wheel locks are ONLY designed to keep the rear wheels from rolling when your chair is at a complete stop.

  • Page 21: Fasteners

    O. UNAUTHORIZED PARTS AND ACCESSORIES NEVER use parts, accessories or adapters other than those authorized by Permobil Manual. If you have any doubt about the compatibility of a particular part, accessory or adapter, consult with an authorized Permobil Manual dealer or contact Permobil Manual Customer Service.
  • Page 22 Permobil ZR Owner’s Manual 1-14 OM0005-ENGLISH_Rev E_ZR...

  • Page 23: Chapter 2: Safety Inspection, Maintenance & Troubleshooting

    CHAPTER 2: SAFETY INSPECTION, MAINTENANCE & TROUBLESHOOTING Introduction Your Permobil Manual wheelchair is designed, engineered and built to provide you with years of exceptional performance. However, proper maintenance and regular safety inspections are essential in order to make sure your wheelchair is operating properly, safely and at maximum efficiency. In addition, proper maintenance and regular safety inspections will extend the...

  • Page 24: Cleaning And Disinfecting

    Clean your chair regularly. Cleaning often will reveal loose or worn parts and enhance the smooth operation of your chair. Cleaning the Frame 1. If your titanium frame came with a “Satin” finish, use a soft cloth to clean the finish. If necessary, moisten the cloth with glass cleaner. If the “Satin” finish of your chair becomes scratched, you can buff out the scratch using the grey, ultrafine Scotch Brite™ pad that was shipped with your chair. Moisten the pad with water and rub it over the scratch in a circular motion. After buffing, wipe off the buffed area using a soft cloth moistened with glass cleaner or wood furniture polish. Permobil ZR Owner’s Manual OM0005-ENGLISH_Rev E_ZR...

  • Page 25: Disinfecting The Frame

    2. Always fully inspect your chair after it has been stored for any period of time before riding in it. See the chart under “Safety Inspections and Maintenance” on pages 2-1 to 2-2. 3. If you store your chair for more than three (3) months, have your chair inspected by an authorized Permobil Manual supplier.
  • Page 26 A calf strap or heel loop is offered as an option with each wheelchair to prevent your feet from slipping backwards off of the footrest. Permobil Manual recommends that you purchase our calf strap or our heel loops with your wheelchair.

  • Page 27: Chapter 3: Footrests

    10 cm squares of self-adhesive Safe Tread. Safe Tread provides a more slip-resistant surface than the footrest of your chair. Use of the Safe Tread is optional, but Permobil Manual recommends you use it in order to reduce the likelihood of your feet slipping off the footrest during use of your chair. If you choose to apply the Safe Tread to your footrest, follow the following instructions: 1.

  • Page 28: Replacing

    5. Adjust the footrest to the desired height. Standard Footrest measurement must be at least 2" shorter than the Front Seat Height measurement. To measure Front Seat Height, measure from floor to top of seat tube at front edge of seat sling. See Figure 3-3. Tighten the Allen screws in the clamp so the footrest height cannot change. Ensure proper ground clearance for your surrounding environment after adjustment. Permobil ZR Owner’s Manual OM0005-ENGLISH_Rev E_ZR...

  • Page 29: Titanium Open Loop Footrest

    3. Tighten the Allen screws, making sure the screws and the locknuts are secure and will not permit the footplate to move up or down under weight. Figure 3-6 Adjusting the Angle Allen Screws Washers Footplate Clamp Locknuts Permobil ZR Owner’s Manual OM0005-ENGLISH_Rev E_ZR...

  • Page 30: Adjusting The Height/Replacing

    The Angle Adjustable High Mount Footrest for the Aero Z wheelchairs can be replaced or the height adjusted by using the tools and following the procedures under “Titanium Footrest (Aero Z)” on page 3-3. Permobil ZR Owner’s Manual OM0005-ENGLISH_Rev E_ZR...

  • Page 31: Flip-Back Footrest

    “Titanium Footrest (ZRA)” on pages 3-2 and 3-3 or “Titanium Footrest (Aero Z)” on page 3-3. Figure 3-11 Adjusting the Angle Footplate Footrest Extension Tube Allen Screws Stop Clamp Permobil ZR Owner’s Manual OM0005-ENGLISH_Rev E_ZR...

  • Page 32: Buckle Adjustable Calf Strap

    Padded Adjustable Calf Strap ® ® The Adjustable Calf Strap and Padded Adjustable Calf Straps are shown in Figure 3-13. Install the calf straps as shown in Figure 3-13. Figure 3-13 Padded Adjustable Calf Strap Permobil ZR Owner’s Manual OM0005-ENGLISH_Rev E_ZR...

  • Page 33: Chapter 4: Backrests And Push Handles

    Nylock Nut Open End wrench. See Figure 4-2. 2. Repeat the procedure on each side of the chair until Pivot the desired tightness is achieved. Bolt Permobil ZR Owner’s Manual OM0005-ENGLISH_Rev E_ZR...

  • Page 34: Changing The Backrest Angle

    4. Make sure both backrest posts are at the same height in the backrest. 5. Reinstall the backrest upholstery. See “Velcro -Style Adjustable Back Upholstery” or “Tension Adjustable by Straps ® Back Upholstery” on pages 7-1 to 7-3. Permobil ZR Owner’s Manual OM0005-ENGLISH_Rev E_ZR...

  • Page 35: Replacing The Backrest

    ® a locking and sealing coating, to reduce the possibility that they will become loose. You should be able to adjust the backrest height approximately four times without reapplying thread lock to these screws. Permobil requires that you reapply Vibra-TITE VC-3 after every fourth adjustment.

  • Page 36: Bolt-On Push Handles

    The threads on the Allen screws that secure the backrest posts to the backrest have been treated with a Vibra-TITE VC-3, ® a locking and sealing coating, to reduce the possibility that they will become loose. Permobil requires that you reapply Vibra-TITE VC-3 each time your backrest is replaced.

  • Page 37: Removing

    See Figure 4-11. Note: The quick release cam lock enables the user to easily disengage and engage the clamp for purposes of repositioning or removing the push handles. Permobil ZR Owner’s Manual OM0005-ENGLISH_Rev E_ZR...

  • Page 38: Removing

    Push Handle Clamp Allen Screws Quick Release Snap Button Cam Lock Removing Tools Needed: • 5 mm Allen Wrench 1. Remove the four Allen screws. See Figure 4-10. 2. Remove the clamp and cam lock. Permobil ZR Owner’s Manual OM0005-ENGLISH_Rev E_ZR...

  • Page 39: Chapter 5: Armrests

    4. Make sure the locking block teeth are fully engaged with the Receiver Block teeth on the receiver, and securely tighten the nylock nuts. 5. Repeat this procedure on the other side of the chair. Nylock Nuts Permobil ZR Owner’s Manual OM0005-ENGLISH_Rev E_ZR...

  • Page 40: Adjusting The Height

    2. While holding the release lever, lift the desk arm assembly to remove it from the desk arm mount. See Figure 5-5. Replacing Slide the desk arm housing into the desk arm mount. See Figure 5-5. Permobil ZR Owner’s Manual OM0005-ENGLISH_Rev E_ZR...

  • Page 41: Swing Away Flip-Back Armrest

    To replace the armrest, swing it back towards the chair and gently push it back down into place. Note: The Swing Away Armrests pivot on nylon sleeves located inside the armrest receiver. If the armrest does not rotate properly, check the sleeves for wear. Permobil ZR Owner’s Manual OM0005-ENGLISH_Rev E_ZR...

  • Page 42: Adjusting The Armrest Height

    Make sure that the stop clamp is securely tightened before applying weight to the armrest. If you ignore this Warning, you could fall, tip over or lose control of the wheelchair and seriously injure yourself or others or damage the wheelchair. Figure 5-8 Adjusting the Armrest Angle Stop Clamp Allen Screw Permobil ZR Owner’s Manual OM0005-ENGLISH_Rev E_ZR...

  • Page 43: Chapter 6: Side Guards

    3 mm Allen Wrench You can adjust the “snugness” of the fit of the side guard bracket in the side guard mount by loosening or tightening the two Allen screws in the side guard mount. See Figure 6-2. Either type of Rigid Side Guard can be made “non-removable” by firmly tightening the two Allen screws in the side guard mount while the side guard is installed. Figure 6-2 Adjusting/Removing/Reinstalling Bracket Allen Screw Dowel Side Guard Mount Clamp Allen Screws Permobil ZR Owner’s Manual OM0005-ENGLISH_Rev E_ZR...

  • Page 44: Removing

    Tools Needed: • 5 mm Allen Wrench 1. Remove the two Allen screws that secure the two halves of the side guard clamp. See Figure 6-3. 2. Remove the Fold-Down Side Guard clamp assembly. Permobil ZR Owner’s Manual OM0005-ENGLISH_Rev E_ZR...

  • Page 45: Reinstalling

    1. Insert Allen screw #1 through the conical washer, the slot in the rear cam, spacer and into the back mount. Do not tighten. See Figure 6-5. 2. Insert Allen screw #2 through the conical washer, the slot in the front cam and into the hole of the frame. Do not tighten. Permobil ZR Owner’s Manual OM0005-ENGLISH_Rev E_ZR...
  • Page 46 You should be able to adjust the cams and/or sideguards approximately four times without reapplying the coating to these screws. If you repeatedly adjust the cams or remove the sideguard, Permobil requires that you reapply Vibra-TITE VC-3 after every fourth adjustment.

  • Page 47: Adjusting

    You should be able to adjust the cams and/or sideguards approximately four times without reapplying the coating to these screws. If you repeatedly adjust the cams or remove the sideguard, Permobil requires that you reapply Vibra-TITE VC-3 after every fourth adjustment.
  • Page 48 Permobil ZR Owner’s Manual OM0005-ENGLISH_Rev E_ZR...

  • Page 49: Chapter 7: Back Upholstery, Seat Upholstery

    8. Align the top of the padded back with the two backrest ears to ensure that the top of the back upholstery is even with the top of the backrest. 9. Reinstall the strap(s) and adjust to the desired tautness. 10. Securely attach the padded back to the backrest ears and lower the back flap back into position in front of the rigidizer bar. 11. Replace the seat cushion. Permobil ZR Owner’s Manual OM0005-ENGLISH_Rev E_ZR...

  • Page 50: Tension Adjustable By Straps Back Upholstery

    4. Align the top of the padded back with the two backrest ears. 5. If desired, adjust the tension on the strap(s). 6. Securely attach the padded back to the backrest ears and lower the back flap back into position in front of the rigidizer bar. Figure 7-4 Adjusting Tension Adjustable Back Upholstery Back Flap Ear Straps Backrest Ears Strap Backrest Padded Back Permobil ZR Owner’s Manual OM0005-ENGLISH_Rev E_ZR...

  • Page 51: Replacing

    5. Repeat Step 4 for each succeeding tension adjustable strap until you have achieved the desired tension in each strap. 6. Place the chair onto all four wheels. 7. Reattach the back upholstery to the seat upholstery and replace the seat cushion and anti-tips (if applicable). Permobil ZR Owner’s Manual OM0005-ENGLISH_Rev E_ZR...

  • Page 52: Replacing The Upholstery

    See Figure 7-7. 4. Detach the adjustment flap, adjust the seat upholstery to the desired tension, and re-secure the adjustment using the Velcro -style material. ® 5. Retighten the Allen screws that attach the seat upholstery to the frame. 6. Reattach the back upholstery to the seat upholstery and replace the seat cushion. Permobil ZR Owner’s Manual OM0005-ENGLISH_Rev E_ZR...

  • Page 53: Replacing The Upholstery

    11. Reattach the bottom of the back upholstery to the seat upholstery and replace the seat cushion. Seat Cushions For seat cushions manufactured by other manufacturers ( e.g. ROHO, Comfort Company, StimuLite, Varilite, etc.), consult the owner’s manual provided by the applicable manufacturer. Permobil ZR Owner’s Manual OM0005-ENGLISH_Rev E_ZR...

  • Page 54: Velcro ® -Style Adjustable Seat Belt

    If you ignore any of these Warnings, you may incur serious or life-threatening injuries. Installation The seat belt will be installed as shown in Figures 7-8. Figure 7-9 Figure 7-8 Proper Belt Position for Belt with D-Ring Velcro -Style Seat Belt with D-Ring ® Permobil ZR Owner’s Manual OM0005-ENGLISH_Rev E_ZR...

  • Page 55: Adjustment

    3. Position: if too high or too low, adjust anchor points. 4. Interference with other devices: relocate anchor points as necessary. 5. Move chair through full range of motion, including folding, and rolling. Check for any interference. Maintenance Check periodically for signs of wear in the stitching and webbing. If significant wear is found, contact your supplier for qualified repair or replacement by Permobil Manual. Permobil ZR Owner’s Manual OM0005-ENGLISH_Rev E_ZR...
  • Page 56 Permobil ZR Owner’s Manual OM0005-ENGLISH_Rev E_ZR...

  • Page 57: Chapter 8: Axle Plates & Camber Plugs

    (CENTER OF GRAVITY; REAR SEAT HEIGHT) All Permobil ZR wheelchairs are equipped with a camber tube. By adjusting the position of the camber tube, you can adjust the center of gravity of your chair. This Chapter explains the various adjustments that are possible. The same adjustment will apply whether you have an aluminum, titanium or carbon fiber camber tube. If your camber is 12°, and you need to...

  • Page 58: Replacing The Camber Tube

    1. Make sure the distance from the end of the camber tube to the camber clamp is identical on both sides of the chair. See Figure 8-3. 2. Make sure the rear wheels are properly inflated. 3. Place the chair on all four wheels with the casters trailing toward the rear of the frame. See Figure 8-4. Permobil ZR Owner’s Manual OM0005-ENGLISH_Rev E_ZR...
  • Page 59 See Figure 8-6. 13. Securely tighten the Allen screws in the camber tube mount. 14. Square the casters to the floor. Figure 8-6 Figure 8-5 Adjusting the Toe-In/Toe-Out Adjusting the Toe-In/Toe-Out Wrench Camber Tube Camber Plug Toe-In/Toe-Out Measurement Permobil ZR Owner’s Manual OM0005-ENGLISH_Rev E_ZR...
  • Page 60 Permobil ZR Owner’s Manual OM0005-ENGLISH_Rev E_ZR...

  • Page 61: Chapter 9: Axles

    WARNING Quick-Release Axles are pre-adjusted to permit minimal “play” in the axle. Permobil Manual recommends that you do not adjust the axle. Improperly adjusting the axle could cause it to malfunction—too much “play” can cause the axle to bend and become stuck in the axle sleeve or Zero Play camber tube;...

  • Page 62: Quad Quick-Release Axles

    WARNING Quick-Release Axles are pre-adjusted to permit minimal “play” in the axle. Permobil Manual recommends that you do not adjust the axle. Improperly adjusting the axle could cause it to malfunction—too much “play” can cause the axle to bend and become stuck in the axle sleeve or Zero Play camber tube;...

  • Page 63: Adjusting The "Play

    Adjusting the “Play” WARNING Quick-Release Axles are pre-adjusted to permit minimal “play” in the axle. Permobil Manual recommends that you do not adjust the axle. Improperly adjusting the axle could cause it to malfunction—too much “play” can cause the axle to bend and become stuck in the axle sleeve or Zero Play camber tube;...
  • Page 64 If you ignore this Warning, your rear wheel could become loose or fall off and you could fall, tip over or lose control of the wheelchair and seriously injure yourself or others or damage the wheelchair. Permobil ZR Owner’s Manual OM0005-ENGLISH_Rev E_ZR...

  • Page 65: Chapter 10: Wheel Locks

    CHAPTER 10: WHEEL LOCKS I WARNING Permobil Manual recommends that you remove the wheel locks from your chair frame prior to engaging in any contact sport. If you ignore this Warning, you may seriously injure yourself or others or damage the wheelchair.

  • Page 66: Compact Pull To Lock

    2. Adjust the position of the wheel lock clamp on the frame so the wheel stop embeds at least 5 mm into the tire when engaged in the locked position. 3. Securely tighten the two Allen screws that secure the wheel lock clamp to the frame. Permobil ZR Owner’s Manual 10-2 OM0005-ENGLISH_Rev E_ZR...

  • Page 67: Replacing

    2. Adjust the position of the wheel lock clamp on the frame so the wheel stop embeds at least 5 mm into the tire when engaged in the locked position. 3. Securely tighten the two Allen screws that secure the wheel lock clamp to the frame. Figure 10-4 Adjusting/Replacing Allen Screws Handle Frame Tire Wheel Stop Permobil ZR Owner’s Manual 10-3 OM0005-ENGLISH_Rev E_ZR...

  • Page 68: Replacing

    “Pull to Lock” or a “Push to Lock” (see “Changing the Uni-Lock From the Push to the Pull Position” on pages 10-4 through 10-6), resulting in 12 possible Uni-Lock setups. Permobil ZR Owner’s Manual 10-4...
  • Page 69 4. Reposition the wheel lock handle to the desired Standard Handle Position 1, 2 or 3 (see Figures 10-8 and 10-9) and replace the Allen screw and locknut. 5. Securely tighten both Allen screws and locknuts. Figure 10-12 Removing the Wheel Lock Handle Handle Locknuts Base Allen Screws Permobil ZR Owner’s Manual 10-5 OM0005-ENGLISH_Rev E_ZR...

  • Page 70: Uni-Lock With Extension Handles

    3. Slide the new Aluminum Scissor Lock into the wheel lock clamp, but do not tighten the two Allen screws. 4. Follow the procedure under “Aluminum Scissor Lock - Adjusting” on page 10-6 to position and secure the new Aluminum Scissor Lock. Permobil ZR Owner’s Manual 10-6 OM0005-ENGLISH_Rev E_ZR...

  • Page 71: Standard Forks

    Figure 11-1 Bearing Fork “Bullet” Caster Housing Fork Stem Caster Cap Fork Washer Allen Head Nylock Nut Axle Screw C Spring C Spring Washer Washer Allen Head Screw Spacer 2 Spacer 1 Caster Permobil ZR Owner’s Manual 11-1 OM0005-ENGLISH_Rev E_ZR...

  • Page 72: Replacing Forks

    Note that the left caster axle is left hand threaded, while the right caster axle is right hand threaded. Permobil ZR Owner’s Manual 11-2...

  • Page 73: Replacing Forks

    If it should become necessary to replace the fork stem on these chairs, this repair can only be performed by Permobil at our factory. If you ignore this Warning, you may fall, tip over or lose control...

  • Page 74: Glide Forks

    Allen Wrench. Note: If your chair has 10 cm or 13 cm Permobil LiteSpeed casters, make sure that Spacer 2 (which is wider than Spacer 1) is positioned on the recessed side of the caster, which should be oriented outwards when the casters are in the trailing position.

  • Page 75: Replacing Glide Forks - Standard And Slipstream Single-Sided

    The ZR fork stem is permanently installed in the “Bullet” Caster Housing. Do not attempt to unscrew the fork stem or the set screw. If it should become necessary to replace the fork stem on these chairs, this repair can only be performed by Permobil at our factory.
  • Page 76 Permobil ZR Owner’s Manual 11-6 OM0005-ENGLISH_Rev E_ZR...

  • Page 77: Chapter 12: Rear Wheels

    Lever 3. Insert the axle all the way into axle sleeve. (locked) 4. Lock the lever on the Quad Quick-Release Axle. 5. Pull firmly on the wheel (without unlocking the lever) to make sure the wheel is locked securely in place. Permobil ZR Owner’s Manual 12-1 OM0005-ENGLISH_Rev E_ZR...

  • Page 78: Handrims

    Figure 12-4 Schrader Valve Presta Valve Presta Schrader Valve Valve Knurled Nut Solid Tires WARNING Replacement of solid tires requires specialized equipment. Therefore, if your solid tires need replacement, you must have this done by an authorized Permobil Manual dealer or qualified technician. Permobil ZR Owner’s Manual 12-2 OM0005-ENGLISH_Rev E_ZR...

  • Page 79: Rear Wheel Spacers

    4. Using a torque wrench, tighten the axle sleeve to 26 N-m. Figure 12-5 Adjusting the Rear Wheel Spacing Camber Plug Washer Lock Washer Camber Axle Sleeve Tube 13 mm Spacer 6 mm Spacer Permobil ZR Owner’s Manual 12-3 OM0005-ENGLISH_Rev E_ZR...
  • Page 80 Permobil ZR Owner’s Manual 12-4 OM0005-ENGLISH_Rev E_ZR...

  • Page 81: Chapter 13: Anti-Tips

    Release Button Mounting the Anti-Tip Receiver WARNING Only an authorized Permobil Manual dealer or qualified technician should install the anti-tip receiver. Note: Unless you ordered anti-tips when you originally ordered your Permobil Manual wheelchair, you will need to order replacement Allen screws when ordering your anti-tips. Tools Needed: • 4 mm Allen Wrench •...

  • Page 82: User-Friendly Anti-Tips

    CHAPTER 13: ANTI-TIPS Figure 13-2 Mounting Allen Screw Washer Nylock Nut Camber Clamp Camber Tube Receiver Allen Screw User-Friendly Anti-Tips The configuration of the User Friendly Anti-Tip is shown in Figure 13-3. Figure 13-3 Engaging the Anti-Tip Anti-Tip Mount Release Lever Receiver Permobil ZR Owner’s Manual 13-2 OM0005-ENGLISH_Rev E_ZR...

  • Page 83: Engaging

    Figures 13-4. Figure 13-4 Engaging Disengaging To disengage the User-Friendly Anti-Tip, grip the anti-tip receiver firmly and pull it downward, away from the anti-tip mounting plate, and raise it until it re-engages in the mounting plate in the position shown in Figure 13-5. Figure 13-5 Disengaging Permobil ZR Owner’s Manual 13-3 OM0005-ENGLISH_Rev E_ZR...

  • Page 84: Adjusting

    Only an authorized Permobil Manual dealer or qualified technician should install the anti-tip receiver. WARNING Do NOT disassemble the anti-tip mounting assembly (see Figure 13-7). Note: Unless you ordered User-Friendly Anti-Tips when you originally ordered your Permobil Manual wheelchair, you will need to order replacement Allen screws when ordering User-Friendly Anti-Tips. Tools Needed: •...
  • Page 85 Before sitting in the chair, make sure the anti-tips are operating properly. To do this, place the unoccupied chair on a level surface, engage the anti-tips and tip the chair backward until the anti-tips are supporting the weight of the chair. Apply sufficient pressure to ensure that the anti-tips are operating properly. Permobil ZR Owner’s Manual 13-5 OM0005-ENGLISH_Rev E_ZR...
  • Page 86 Permobil ZR Owner’s Manual 13-6 OM0005-ENGLISH_Rev E_ZR...

  • Page 87: Chapter 14: Transportation Options

    Alterations or substitutions should NOT be made to the wheelchair securement points or to structural or frame parts or components. WARNING Permobil expressly disclaims that use of its Transport Brackets on a Permobil wheelchair will prevent the wheelchair from being damaged in the event of a motor vehicle accident. WARNING A sudden stop and/or collision may structurally damage your wheelchair.

  • Page 88: Introduction

    ONLY if it is neccessary to adjust the seat depth. However, any adjustment of the rear transport brackets must ALWAYS be performed by an authorized Permobil dealer, and even if such an adjustment is made, you must ALWAYS use the bolts and nuts originally shipped with your wheelchair.

  • Page 89: Warranty Modification

    “play” or looseness in any of the four wheelchair tie down straps. WARRANTY MODIFICATION A copy of the Permobil Limited Warranty was enclosed with your new wheelchair when it was shipped from our factory. Our warranty is also available on our website, www.permobilus.com. That Limited Warranty applies to your Permobil ZR Manual wheelchair with the Wheelchair Transport Bracket Option, with the following modification: The warranty is void if the wheelchair is damaged as a result of transit use.
  • Page 90 Permobil ZR Owner’s Manual 14-4 OM0005-ENGLISH_Rev E_ZR...
  • Page 91 Permobil ZR Owner’s Manual 14-5 OM0005-ENGLISH_Rev E_ZR...
  • Page 92 Every person has the right to have his or her disability compensated as far as possible by aids with the same technical standard as those we all use in our everyday lives. Per Uddén, Permobil Founder WWW.PERMOBIL.COM I 2701 WEST COURT STREET, PASCO, WA 99301 PHONE 800.545.2266 I FAX 800.586.2413...

This manual is also suitable for:

ZrZrseries2

Table of Contents