Oracle Server X6-2 Installation Manual page 89

Configure an operating system on the server.
■
Configure or install other software on the server.
■
The Oracle ILOM Remote System Console Plus supports a full-control console video session
for a primary user and view-only console video sessions for all other signed-in users. By
default, a maximum of four video redirection sessions can be launched from the Oracle
ILOM web interface. To prevent other signed-in video session users on the SP from viewing
confidential data, you can set the Maximum Client Session Count property to 1 on the KVMS
page in the Oracle ILOM web interface.
For instructions, see the following sections:
"Set the Mouse Mode" on page 89
■
"Redirect Host Server Desktop or Storage Devices Using Oracle ILOM" on page 90
■
Set the Mouse Mode
In Oracle ILOM you can set the Mouse Mode property to optimize mouse movement in the
Oracle ILOM Remote System Console Plus. The mouse mode can be set to either Absolute or
Relative and should be set according to the requirements of the operating system that you are
using to connect to Oracle ILOM. Review the following guidelines to determine the appropriate
mouse mode for your system:
For Windows and Oracle Solaris operating systems, set the mouse mode to Absolute.
■
For newer versions of Linux operating systems, such as Oracle Linux 7, Oracle Linux 6.x,
■
Red Hat Enterprise Linux (RHEL) 7, or RHEL 6.x, set the mouse mode to Absolute.
For older versions of Linux operating systems, such as Oracle Linux 5.x or RHEL 5.x, set
■
the mouse mode to Relative and switch to Absolute if the mouse does not work properly.
For Oracle VM and VMware ESXi, mouse mode settings do not apply.
■
For more information about selecting a mouse mode, refer to the Oracle ILOM Administrator's
Guide for Configuration and Maintenance, Firmware Release 3.2.x at
com/goto/ilom/docs.
To set the mouse mode, perform the following steps:
1. Log in to the Oracle ILOM web interface.
See "Log In to Oracle ILOM Using a Remote Ethernet Connection" on page
Navigate to the Remote Control → KVMS page, and then select a mouse mode
2.
from the Mouse Mode drop-down list.
Click Save.
3.
Set the Mouse Mode
https://www.oracle.
81.
Connecting to Oracle ILOM 89