Oracle Server X6-2 Installation Manual page 44

Mark the Rackmount Location
The bottom edge of the card corresponds to the bottom edge of the server. Measure up from the
bottom of the installation card.
Mark the mounting holes for the front slide-rails.
3.
Mark the mounting holes for the rear slide-rails.
4.
Related Information
"Rack Requirements" on page 38
■
"Install Mounting Brackets Onto the Server" on page 42
■
"Attach Tool-less Slide-Rail Assemblies" on page 47
■
44 Oracle Server X6-2 Installation Guide • July 2020