Install The Cable Management Arm - Oracle Server X6-2 Installation Manual
Hide thumbs
Also See for Server X6-2:
- Installation and configuration manual (337 pages) ,
- Service manual (284 pages) ,
- Installation manual (72 pages)
Table of Contents
Advertisement
Install the Cable Management Arm
5.
If necessary, lay any cables protruding from the server back panel into the cable
trough.
Install the Cable Management Arm
Follow this procedure to install the cable management arm (CMA), which you can use to
manage cables connected to the rear of the server.
Note -
power cables are long enough to connect to the rack-mounted servers when routed through the
CMAs.
1.
Unpack the CMA.
The following figure shows the CMA components.
56
Oracle Server X6-2 Installation Guide • July 2020
Before installing the cable management arms (CMAs), ensure that the right-angle AC
Advertisement
Table of Contents
Troubleshooting
