Oracle Server X6-2 Installation Manual page 60

Install the Cable Management Arm
a. Align connector C with the slide-rail so that the locking spring (callout 1) is
positioned inside (server side) of the right slide-rail [frame 1].
Callout
1
Insert connector C into the right slide-rail until it locks into place with an
b.
audible click [frames 2 and 3].
Gently tug on the right side of the CMA's rear slide bar to verify that
c.
connector C is properly seated.
60 Oracle Server X6-2 Installation Guide • July 2020
Description
Connector C locking spring