Oracle Server X6-2 Installation Manual page 119
Hide thumbs
Also See for Server X6-2:
- Installation and configuration manual (337 pages) ,
- Service manual (284 pages) ,
- Installation manual (72 pages)
Table of Contents
Advertisement
In this example, Drive Group 2, RAID 1 is created.
12.
Use the following steps to make a drive bootable.
This places a boot sector on the drive so that you can install an operating system on it.
a.
Select Ctrl Mgmt to open the Control Management page.
b.
From the Ctrl Mgmt page, use the arrow keys to navigate to the Boot device
field, and press Enter.
Configuring Storage Drives for Operating System Installation
Configure RAID in Legacy Boot Mode
119
Advertisement
Table of Contents
Troubleshooting
