Reset Buttons And Led - Extron electronics TouchLink TLP 1000MV User Manual

Figure 3.
A
Light sensor — mounted on top of the display frame. The sensor monitors the level of
ambient light and adjusts the screen brightness. The sensor can only be viewed from above
the panel.

Reset Buttons and LED

There are two buttons and an LED recessed behind the faceplate. They can be accessed by
removing the front bezel, using the Extron removal tool.
Figure 4.
A
Menu button — activates the on-screen menus for calibrating the unit (see
Menus
B
Reset button — allows the unit to be reset in any of four different modes (see
Modes
C
Reset LED — provides feedback about the reset status when the user presses the reset
button (see
A A A
TLP 1000MV Top View
A A A
TLP 1000MV Front Panel with the Bezel Removed
on page 16).
on page 49).
Reset Modes).
TLP 1000MV and TLP 1000TV • Panel Features
B B B C C C
On-screen
Reset
5