On-Screen Menus; Accessing The On-Screen Menus - Extron electronics TouchLink TLP 1000MV User Manual

On-screen Menus

This section describes:
•
•

Accessing the On-screen Menus

When the TouchLink panel first has power applied, the unit boots up and displays the opening
screen. To access the on-screen menus, press the Menu button (see
for the TLP 1000MV or
The menus open at the Main screen. There are five different screens:
•
•
•
•
•
The screens are selected by pressing the appropriate button at the left side of the screen.
Press the Exit button at the bottom left corner of the screen to apply and save any changes
and leave the menu screens.
Main
Figure 13.
Values can be changed by pressing the buttons to highlight them. Press the Down or Up buttons
to adjust the values or press the Auto Backlight or Wake on Motion buttons to toggle
between Off and On. The current setting is shown above the buttons.
Sleep Timer determines how long the panel remains inactive before entering sleep mode, when
the screen goes dark to save power. The time can be changed from 0 to 50,000 seconds (in
10-second increments). The time that is currently selected is shown above the buttons.
When ambient lighting is high, the screen may need a high level of backlighting for readability.
Accessing the On-screen Menus
Touch Calibration Screen
figure 9,
Main (see page 16)
Volume (see page 17)
Time (see page 18)
Network (see page 18)
Video (see page 19)
Main
Sleep timer: 300 Sec
Volume
Down
Time
Backlight: 073%
Network
Down
Video
Exit
Main Screen
A
page 12 for the TLP 1000TV).
Auto Backlight
Up On
Up
Wake on Motion
On
TLP 1000MV and TLP 1000TV • On-screen Menus
figure 4, A on page 5
PoE
Active
16