Main Screen; Touch Calibration Screen - Extron electronics TouchLink TLP 1000MV User Manual

Video
Figure 17.
When a video input is connected to the MTP input, the video can be previewed in the small gray
rectangle on the screen. The preview allows you to adjust the following video properties, using
the appropriate Down or Up buttons:
•
•
•
•

Touch Calibration Screen

After setting the Main, Volume, Time, Network, and Video values, calibrate the touch area
of the touchpanel. To open the calibration screen, press the Menu button a second time
(see
TLP 1000TV).
Figure 18.
Press on the green box until the color reverts to gray with a white border and a second box
is highlighted. Repeat until all four boxes have been pressed and calibrated. At that point the
screen automatically returns to the
Exit the on-screen menus, by pressing the Exit button in the bottom left corner of the menu
screens.
Main Contrast: 064
Volume
Down
Time
Brightness: 128
Network
Down
Video
Exit
Video Screen
Contrast between 0 and 127 (default 64)
Color between 0 and 127 (default 64)
Brightness between 0 and 255 (default 128)
Tint between 0 and 255 (default 128)
A
figure 4, , on page 5 for the TLP 1000MV or
+
Press and Hold
Highlighted Box
Until Color Changes
+
Touch Calibration Screen
Color: 064
Up Down Up
Tint: 128
Up Down Up
figure 9,
Main screen (see page 16).
TLP 1000MV and TLP 1000TV • On-screen Menus
A
, on page 12 for the
+
+
19