Updating Firmware Using Gui Configurator - Extron electronics TouchLink TLP 1000MV User Manual

Updating Firmware Using GUI Configurator

1.
If necessary, install the Extron Firmware Loader utility onto the computer (see
Software
2. Find the firmware on the Extron website and download it to your computer, as described in
steps 3 and 4 in the previous section.
3. Open GUI Configurator. Open Firmware Loader by clicking on Firmware Update
Manager... in the Tools menu.
Figure 30.
4. Follow steps 2 to 8 from the previous section,
Firmware Loader
Updating Firmware From the Product Web Pages
1. Download the firmware for the touchpanel (see
2.
Open your browser and type the IP address of the TLP 1000 unit into the address box. The
browser opens the TouchLink panel web pages (see
Pages
1 1 1
Figure 31.
3. Click the Configuration tab (
4. Select Firmware Upgrade (
5. Use the Browse button (
step 1.
6. Click Upload (
The Touchpanel screen shows the message Firmware Uploading... Please Wait....
When the firmware is uploaded, the screen shows the message Restarting.... Once the
firmware is installed, the panel can be calibrated using the
16) or
on page 21).
Opening Firmware Loader from GUI Configurator
on page 28.
on page 24).
2 2 2
Firmware Upgrade Web Page
1
).
2
).
3 ) to navigate to and select the firmware file that was saved in
4
).
Using the TouchLink Panel Web Pages
TLP 1000MV and TLP 1000TV • Configuration Software
Updating Firmware Using Extron
Downloading Firmware
Using the TouchLink Panel Web
3 3 3 4 4 4
On-screen Menus
(see page 24).
Installing the
on page 27).
(see page
29