Using The Touchlink Panel Web Pages - Extron electronics TouchLink TLP 1000MV User Manual

Using the TouchLink Panel Web Pages

Both the TouchLink panels have default web pages that can be used to read and change the
current settings of the panels. The web pages can be accessed as follows:
1.
2.
Open your browser and type the IP address of the TLP 1000 unit into the address field. The
browser opens the TouchLink panel Status page, which is read-only and provides basic
information about the model, date and time, and IP settings.
Figure 23.
System Status Page
Click the Configuration tab and select System Settings, which allows the user to modify
the IP settings and the date and time settings. These correspond to the
page 18) and Time (see page 18) screens in the on-screen menus.
TLP 1000MV and TLP 1000TV • Configuration Software
Network
(see
24