Tlp 1000Tv Rear Panel Features And Connections - Extron electronics TouchLink TLP 1000MV User Manual

TLP 1000TV Rear Panel Features and Connections

The TLP 1000TV has a stand that allows it to be placed on a desktop. The stand can be
removed to VESA mount the unit. Both the stand and the touchpanel have removable covers
that conceal the rear panel features and protect cables that are attached to the TLP 1000TV.
The rear and base covers can be removed using the Extron removal tool (see
TLP 1000TV Base for VESA Mounting
D D D
E E E
F F F
I I I
Figure 9.
A
B
C
D
E
F
G
H
I
The following features and connections are available on the back panel.
A
B
C
D
TLP 1000TV Rear Features
Menu button (see page 12)
Reset button
(see page 12)
Reset LED (see page 12)
MTP signal adjustment controls
MTP input (see page 13)
Network and Power over Ethernet connector
Power connector (see page 14)
VESA mounting holes (see page 15)
Kensington Security Slot
Menu button — activates the on-screen menus for calibrating the unit (see
Menus on page 16).
Reset button — allows the unit to be reset in any of four different modes (see
Modes on page 49).
Reset LED — provides feedback about the reset status when the user presses the reset
button (see Reset Modes).
MTP signal adjustment controls — three MTP signal adjustments are available for
S-video luminance gain (VID/Y), S-video chrominance gain (C), and sharpness (S). For
composite video signals, the gain is controlled by the VID/Y adjustment.
on page 47).
(see page 12)
(see page 13)
(see page 15)
TLP 1000MV and TLP 1000TV • Panel Features
Removing the
G G G
A A A
B B B
C C C
H H H
On-screen
Reset
12