Ross Ultricore RCP-ME User Manual page 86

Area
Breakaways #
Name
level mask (1...32)
Breakaways Clear
Set
Configuration Cutbus Mode
Permanent Category
Mode
Cutbus Dest 1
Cutbus Dest 2
On Brightness
Off Brightness
86 • DashBoard Interface Overview
Table 16.5 Configuration Tab
Item Parameters
#
<text>
1-32
Off
Normal
Multi
Off
On
#
#
#
#
Description
The list number of the breakaway (read-only)
The name assigned for the breakaway. The names
are user configurable
Click a router level to:
• assign a level mask ( ) or
• de-select a level mask (
If using with an Ultricore control system, these
level numbers correlate to the Level ID in the
Ultricore database.
Click this button to clear all level masks for a
given breakaway
Click this button to apply all selected level masks
for a given breakaway
Turn off cutbus mode
Single or dual cutbus. Cutbus operation is
automatically invoked when there are no
destination buttons or crosspoints set on the
RCP-ME.
Advanced cutbus mode that utilizes crosspoint
buttons to support an arbitrary number of cutbus
outputs. Cutbus operates as a collection of
crosspoint buttons that, when selected, will display
source and destination information about the
selected crosspoint on the LCD screen
Panel is in standard multi-page menu layout with
optional category mode assignment
Panel is permanently in Category mode. No
multi-page menus or other key assignments are
available.
Enter or select an output from the top row of
buttons for the cutbus destination if using Normal
Cutbus Mode
Enter or select an output from the bottom row of
buttons for the cutbus destination if you want to
use dual Normal Cutbus Mode. For single cutbus
mode, this must be set to the same destination as
Cutbus Dest 1.
Enter or select a brightness level between 1 and 8
for the buttons when they are selected (with 1
being the dimmest and 8 being the brightest).
Enter or select a brightness level between 0 and 8
for the buttons when they are not selected (with 0
turning off brightness, 1 being the dimmest, and 8
being the brightest)
RCP-ME User Guide (v4.0)
)