Ross Ultricore RCP-ME User Manual page 34

• Press twice to toggle rapidly between the two sources (toggle cadence is 400 ms). The source label on
CHOP
the screen toggles between the two sources. Fast chop is indicated by an upper-case C.
7. Do one of the following:
• If you are in slow chop, press
• If you are in fast chop, press
The status of the button returns to
34 • Destination and Sources
SRC: Server 1
1 2 3 4
C
DST: VTR 2
SRC: Camera 1
1 2 3 4
C
DST: VTR 2
Figure 3.1 Toggling between two sources using slow chop
SRC: Server 1
1 2 3 4
C
DST: VTR 2
SRC: Camera 1
1 2 3 4
C
DST: VTR 2
Figure 3.2 Toggling between sources using fast chop
twice to stop toggling between the two sources.
CHOP
once to stop toggling between the two sources.
CHOP
.
CHOP
RCP-ME User Guide (v4.0)