Page 2
6. We will keep our promises. 7. We will treat the competition with respect. ii • Thank You For Choosing Ross — Ultrix Acuity Operation Manual (v11.1)
Page 3
Scope of this Notice PATENTS ISSUED and PENDING. All rights We at Ross Video Ltd. ( “ We ” , “ Us ” , or “ Our reserved. No part of this publication may be ” ) know that your privacy is important. This...
Page 4
Separate manuals are Important Safety Instructions included for the following component products: • Acuity Rack Panel Warning: Read these instructions. ™ • Ultrix Router 2. Keep these instructions. iv • Document Information — Ultrix Acuity Operation Manual (v11.1)
Page 5
(LAN). Only connect to or electric shock, do not expose this apparatus networks that remain inside the building. Do not to rain or moisture. connect to networks that go outside the building. Ultrix Acuity Operation Manual (v11.1) — Document Information • v...
Page 6
Warning: This equipment is compliant with Class A regulatory compliance, or performance and may of CISPR 32. In a residential environment this void your warranty. equipment may cause radio interference. vi • Document Information — Ultrix Acuity Operation Manual (v11.1)
Page 7
You replacement parts may be supplied free of can also contact Ross Video for more charge while defective items undergo repair. information on the environmental performances of our products. Ultrix Acuity Operation Manual (v11.1) — Document Information • vii...
Page 8
Ross Video Limited — 8 John Street Iroquois, Ontario, Canada, K0E 1K0 Ross Video Incorporated — P.O. Box 880, Ogdensburg, New York, USA, 13669-0880 General Business (+1)613-652-4886 Office: Fax: (+1)613-652-4425 Toll Free Technical 1-844-652-0645 Support (North America): viii • Document Information — Ultrix Acuity Operation Manual (v11.1)
To Set Up a Wipe............50 DVE Wipes................51 To Set Up a DVE Transition........52 Menu System..........31 Fade to Black................52 ® To Fade to Black on Acuity Panels......52 Using the Menu System............31 Preset Background..............52 Auto-Follow Menus..........32 Ultrix Acuity Operation Manual (v11.1) — Contents • ix...
Page 10
To Recall a Memory on TouchDrive To Rename a Directory..........84 Panels...............70 To Delete a Media File or Directory.....84 To Prevent a Memory From Being To Copy and Paste a Media File......84 Recalled............71 Media-Store Cache..............84 x • Contents — Ultrix Acuity Operation Manual (v11.1)
Page 11
To Assign an Off-Air Run CC.......106 Using DVE Sequences............120 To Assign an On-PST Run CC......106 To Run a DVE Sequence........120 Copying and Moving Custom Controls......106 Running Multiple Sequences......121 To Copy or Move a Custom Control....106 Ultrix Acuity Operation Manual (v11.1) — Contents • xi...
Page 12
Working in 3D Space........122 Moving in 3D Space.............122 Perspective................122 Relative Size............122 Parallax..............122 Rotation.................122 X-Axis Rotation.............123 Y-Axis Rotation.............123 Z-Axis Rotation.............123 Pre-Loaded Effects........124 Simple Wipes................124 Classic Wipes............124 Rotary Wipes............124 Matrix..............124 Special..............124 Glossary..........125 Index..........129 xii • Contents — Ultrix Acuity Operation Manual (v11.1)
The the standard control panel only has a single row and a two-line display showing how the buses are assigned. Note: Double-Down module shown Note: Double-Down module shown. ® Ultrix Acuity Operation Manual (v11.1) — Acuity Control Panel Overview • 13...
The functionality of the Recall Clip/CC button is set using the CC Global Recall personality option. ® 14 • Acuity Control Panel Overview — Ultrix Acuity Operation Manual (v11.1)
Press the button again to turn the border off. 2D DVE Allows you to apply 2D DVE resources to the selected keyer. ® Ultrix Acuity Operation Manual (v11.1) — Acuity Control Panel Overview • 15...
The buttons along the bottom of the module correspond to the buttons on the bottom of the menu and the knobs correspond to the three knobs on the menu. ® 16 • Acuity Control Panel Overview — Ultrix Acuity Operation Manual (v11.1)
Allows you to turn the time clock preview overlay element on or off. MASK PV Allows you to turn the mask preview preview overlay element on or off. ® Ultrix Acuity Operation Manual (v11.1) — Acuity Control Panel Overview • 17...
Tip: To quickly assign a button row to a bus on the Double-Down panel, press and hold one of the mnemonic buttons and select ® 18 • Acuity Control Panel Overview — Ultrix Acuity Operation Manual (v11.1)
ME. keyers (1,3,5,7). This can be changed with the DD Key Delegation personality option. ® Ultrix Acuity Operation Manual (v11.1) — Acuity Control Panel Overview • 19...
3. Press More > Assign As Preset. 4. Press the quick preset button that you want to store the current configuration to. The name of the button updates to show the current selection. ® 20 • Acuity Control Panel Overview — Ultrix Acuity Operation Manual (v11.1)
(DVE Keys (Fly Key) page 63) PST PATT Allows you to assign a Preset Pattern as the key type for the selected key. (Preset Pattern on page 62) Ultrix Acuity Operation Manual (v11.1) — TouchDrive Control Panel Overview • 21...
The HOLD and RESET buttons are used to lock the positioner to the current assignment (HOLD) or used with other panel buttons to reset different areas (RESET). 22 • TouchDrive Control Panel Overview — Ultrix Acuity Operation Manual (v11.1)
When the button KEY X Allows you to include a key with the next is not active you can recall a memory. transition. Ultrix Acuity Operation Manual (v11.1) — TouchDrive Control Panel Overview • 23...
The SEL button is lit when the key bus is assigned to the previous resources in this assignment mode. assigned to that key. 24 • TouchDrive Control Panel Overview — Ultrix Acuity Operation Manual (v11.1)
Page 25
Aux, Memory Bank, or CC Bank) that you want to assign the key bus to. 6. Tap the mnemonic for where you want to assign the key bus to. Ultrix Acuity Operation Manual (v11.1) — TouchDrive Control Panel Overview • 25...
ME, key, or aux. 6. Mnemonic Displays — The mnemonic display shows the name of the source, or custom control, assigned to the button directly below it. The mnemonic 26 • Carbonite Black Control Panel Overview — Ultrix Acuity Operation Manual (v11.1)
The name of the memory is shown on the Mounting Specifications: mnemonic button. • Mounting Interface: VESA MIS-D, 100, C • Unit Weight: ~16lbs (7kg) Ultrix Acuity Operation Manual (v11.1) — Carbonite Black Control Panel Overview • 27...
FTB rate. the what you want to assign the bus or row to. The mnemonics show the selections. 28 • Carbonite Black Control Panel Overview — Ultrix Acuity Operation Manual (v11.1)
5. Ensure that Main is selected for the Panel By default, the Carbonite Black control panel is automatically detected in DashBoard and can be setup to communicate with the Menu Display 6. Click Apply Changes. Ultrix Acuity Operation Manual (v11.1) — Carbonite Black Control Panel Overview • 29...
Boot from memory card Note: When you force the static IP, the IP address that the control panel expects to find the frame is also set (192.168.0.123). 30 • Carbonite Black Control Panel Overview — Ultrix Acuity Operation Manual (v11.1)
The menu system allows you to access all of the three knobs. These knobs are used to make setup and configuration information of the selection from the list next to the knob. A knob Ultrix Acuity Operation Manual (v11.1) — Menu System • 31...
Pressing one of these Auto Follow Setup buttons rounds the knob value for that button, ME Map Color Scheme 32 • Menu System — Ultrix Acuity Operation Manual (v11.1)
Page 33
Shot Box Module Setup Frame Diagnostics Manage Shot Box Pages Assign Panel Bus Maps Shot Box Page Setup Preview Overlay Font Colors Key Priority Setup Enter Serial Number Camera Shotbox Enter Option Number Ultrix Acuity Operation Manual (v11.1) — Menu System • 33...
Page 34
Copy Bus Maps SideStick Settings Select Panel Type Ethernet Monitor Edit Bus Maps Set System Time Relative Bus Copies Diagnostics Alternate Device Setup UltraChrome 2 Box Mask Prop Mode Copy/Move Memory 34 • Menu System — Ultrix Acuity Operation Manual (v11.1)
Edit Custom Control to enter values. The punchpad allows you to Modify Event enter numeric values, copy and paste values Auto Key Setup between knobs, and default the values. Auto Key Setup Ultrix Acuity Operation Manual (v11.1) — Menu System • 35...
Tap a region of the display Keep the following in mind: Keep the following in mind when working with the memory punch pad: 36 • Menu System — Ultrix Acuity Operation Manual (v11.1)
• RGB — use the Red, Green, and Blue fields • A mnemonic will flash white when pressing to enter the color you want to use. the mnemonic performs an action. The Ultrix Acuity Operation Manual (v11.1) — Menu System • 37...
9. Click Other... > Network. are a few of the menus and functions that 10. Enter the SoftPanel computer IP address in are not available. the IP Address Satellite X field. The satellite 38 • Menu System — Ultrix Acuity Operation Manual (v11.1)
3. Next the 3-knob menu, press BACK + UP ONE. The control panel beeps and a popup is displayed. The file is stored as a bitmap on the USB drive. Ultrix Acuity Operation Manual (v11.1) — Menu System • 39...
ME 3 will appear behind ME 1 in the video layering. As with MEs, the priority of keys can be altered. The priority of keys can be changed using a Key Over transition. 40 • Switcher Basics — Ultrix Acuity Operation Manual (v11.1)
Memory module, or the Effects Memory module. 3. Select the buses to use for the background of each output. • Bkgd/Pst — sources selected on the background and preset buses of the ME are used. Ultrix Acuity Operation Manual (v11.1) — Switcher Basics • 41...
ME + the 1, 2, 3, or 4 button (the ME you want To Turn On/Off a Remote Enable to reset) at the same time. 1. Press HOME > More > Remote Enables. 42 • Switcher Basics — Ultrix Acuity Operation Manual (v11.1)
• If a specific keyer was active in the source • PST — preset bus of the selected ME ME, it becomes active in the destination. • UTILX — utility bus of the selected ME Ultrix Acuity Operation Manual (v11.1) — Switcher Basics • 43...
• Key XV — key X video of the selected ME • Key XA — key X alpha of the selected ME • Aux X — aux bus X of the selected aux bus bank 44 • Switcher Basics — Ultrix Acuity Operation Manual (v11.1)
Program ME to be part of the program output. • If the auto transition includes both a background and a keyer, the ME Rate is used for the transition. Ultrix Acuity Operation Manual (v11.1) — Transition • 45...
Tap one of theses settings to show additional transitioned a the ME Rate. options. 6. Perform the transition. Tip: The menu follows the transition type selection and shows the settings for that transition type. 46 • Transition — Ultrix Acuity Operation Manual (v11.1)
• DISS — perform a dissolve or WhiteFlash a. On the Keyer area tap the key you transition. Refer to Dissolves on page 50 want to set the rate for. WhiteFlash on page 53 for more information. Ultrix Acuity Operation Manual (v11.1) — Transition • 47...
Split ME Functionality The Split ME functionality allows you to take advantage of the configurable program outputs feature to create two semi-independent MEs (Program A and Program B) in a single ME.The 48 • Transition — Ultrix Acuity Operation Manual (v11.1)
2. Tap Rate on the display in the Keyers area. Tip: If you have a panel with the Memory area, you can press ME RATE button on the Memory area for the ME that you want Ultrix Acuity Operation Manual (v11.1) — Transition • 49...
Preset bus video signal completely replaces changes whether the transition starts as a the Background bus video signal. During the circle in the center of the screen and 50 • Transition — Ultrix Acuity Operation Manual (v11.1)
• Transition Rotation — apply a fixed transition between video signals. For a number of rotations to the pattern as the Background transition, the video signal on the wipe is transitioning. The speed of the Ultrix Acuity Operation Manual (v11.1) — Transition • 51...
• The current next transition setting, including for the transition. keyers, are stored. 4. Press Flip Flop to select if the wipe moves • Sources selected on each bus is stored. in the opposite direction with every 52 • Transition — Ultrix Acuity Operation Manual (v11.1)
The DISS button flashes, indicating a DVE) on the transition module. WhiteFlash transition has been selected. 2. Press Color and use the color picker to select the color you want to use. Ultrix Acuity Operation Manual (v11.1) — Transition • 53...
Roll Clip only works with external devices that are being controlled by the switcher. The operating mode of the Roll Clip button is set with the Roll Clip Mode personality option. Ultrix Acuity Operation Manual (v11.1) — Transition • 55...
You can tap any of these setting to have the menu follow to those settings. and you can select the source for the chroma key. The keyer switches to an 56 • Keying — Ultrix Acuity Operation Manual (v11.1)
However, if the scene includes high detail personality option. luma content in edge regions, these may not be included in the output. 2. Press AUTO SELECT. 3. Press Clip/Gain and toggle Key Mem to Off. Ultrix Acuity Operation Manual (v11.1) — Keying • 57...
Any further adjust is Shadow Sensitivity. only required if you want to adjust aspects • Highlight Sensitivity — use this setting of the key. to fill areas with specular highlights, such 58 • Keying — Ultrix Acuity Operation Manual (v11.1)
– it may be • Adjust camera shading using appropriate difficult to provide good separation between charts, ensuring that grey scale, lens flare, background and foreground elements. Ultrix Acuity Operation Manual (v11.1) — Keying • 59...
Lighting configuration will naturally vary with 3. Init, Try, Re-Init and Try Again — The set design and choice of lighting equipment, but fine-tuning required to get a great result is 60 • Keying — Ultrix Acuity Operation Manual (v11.1)
Page 61
Lens: Select a camera lens based on the set size and production needs. Some lower-cost lenses can exhibit chromatic aberration - colored halos - around edge transitions in certain lens regions. Ultrix Acuity Operation Manual (v11.1) — Keying • 61...
(2,4,6) and the button row below is assigned to the odd numbered keyers (1,3,5). This can be changed with the DD Key Delegation personality option. 2. Press PST PATT. 62 • Keying — Ultrix Acuity Operation Manual (v11.1)
Channel to switch between them. The active channel is shape and size of the key in the 2D world highlighted in red. and the proportion part of the key that has been cropped off. Ultrix Acuity Operation Manual (v11.1) — Key Modifiers • 63...
3. Press Pivot Position and use the X Pivot, Y shape and size of the key in the 2D world. Pivot, and Z Pivot knobs, or the positioner, 6. Press More. 64 • Key Modifiers — Ultrix Acuity Operation Manual (v11.1)
Both • Both — apply smoothing both channels can be selected when using any of the horizontally and vertically to the image. DVE tools. If the channels selected have different Ultrix Acuity Operation Manual (v11.1) — Key Modifiers • 65...
3. In the Layering area select how the channel, that channel will be pasted to channels interact. (Not available in UHDTV1 both channels. video formats.) 5. Press DVE Menu > Channel Paste. 66 • Key Modifiers — Ultrix Acuity Operation Manual (v11.1)
1 and 2 selection are not available. splitting. • Frame — strobe is applied to the entire 4. Select the source on the key bus for the frame of video. alpha you want to use. Ultrix Acuity Operation Manual (v11.1) — Key Modifiers • 67...
• Top — move the top edge of the mask up mask. The portion of the image that was or down. masked out is now visible, and the portion that was visible is masked. 68 • Key Modifiers — Ultrix Acuity Operation Manual (v11.1)
1. Select the ME(s) that you want to recall the 5. Press ENTER to store the memory. You are memory on. prompted to name the memory. This can be done later. 70 • Memory Functions — Ultrix Acuity Operation Manual (v11.1)
4. Press Don't Recall Memory. 5. Press Name and enter the new name for the Tip: Press Recall Memory to force an empty memory to memory. be recalled. 6. Press Accept New Name. Ultrix Acuity Operation Manual (v11.1) — Memory Functions • 71...
The bank Tip: Select None to not use a color for the mnemonic. number is the first digit in the memory number. 9. Press Accept New Name. 72 • Memory Functions — Ultrix Acuity Operation Manual (v11.1)
You can also press ATTRIB on the Effects Memory Keyer buses are recalled with the module. memory. Keyer parameters such as key type, clip, and gain settings are always 2. Press Custom Control. recalled with a memory. Ultrix Acuity Operation Manual (v11.1) — Memory Functions • 73...
Memories can be copied, moved, or swapped interpolate from the starting memory to the with other memories on the switcher. This destination memory, creating a smooth, two allows you to duplicate memories on different keyframe effect. 74 • Memory Functions — Ultrix Acuity Operation Manual (v11.1)
The settings that used to be in the source will be in the destination, and the settings that used to be in the destination will be in the source. Ultrix Acuity Operation Manual (v11.1) — Memory Functions • 75...
As a rule, anything that is set up from the registers to the setup. Personality menus is stored in these registers. 76 • Switcher Setups — Ultrix Acuity Operation Manual (v11.1)
3. Press Recall Individual and select the Recalling Setups individual item you want to recall. The switcher can recall individual registers or • Memory Register — individual memory setups from either the internal hard drive, Ultrix Acuity Operation Manual (v11.1) — Switcher Setups • 77...
To Upload a Setup From a Computer 1. Open a web browser and navigate to the IP address of the switcher frame. You are prompted to enter a user name and 78 • Switcher Setups — Ultrix Acuity Operation Manual (v11.1)
Audio can be added to the playout of a Media Fill Only 24-bit -Store channel either by loading the file directly, or by associating the audio file with the video Fill and Alpha 32-bit Ultrix Acuity Operation Manual (v11.1) — Media-Store • 79...
Memory area to select it. On the keypad. The length of time it takes to load a file TouchDrive panels the MENU button must be active on the 80 • Media-Store — Ultrix Acuity Operation Manual (v11.1)
(the same channel as you loaded the video playback bit-depth is not changed. in). • Audio is embedded in the ancillary data of the video stream that the Media-Store channel is included in. Ultrix Acuity Operation Manual (v11.1) — Media-Store • 81...
USB drive are copied to the /USB All on-air properties adjustments for a channel folder on the switcher. are lost when a new media file is loaded into that channel. 82 • Media-Store — Ultrix Acuity Operation Manual (v11.1)
4. Set the media properties as required. properties that applies only to animation. The Looping In the Looping area, set whether the audio will start over when it reaches the end (On), or not (Off). Ultrix Acuity Operation Manual (v11.1) — Media-Store • 83...
Media-Store Cache 2. Navigate to the directory that you want to create a directory in. You can view what media files are currently loaded into cache or remove a currently loaded 84 • Media-Store — Ultrix Acuity Operation Manual (v11.1)
Press HOME > More > Effects > MediaStore. 2. Press More > View Video Cache. 3. Use the middle knob to select the media file that you want to remove. 4. Press Remove From Cache. Ultrix Acuity Operation Manual (v11.1) — Media-Store • 85...
2. Use the Bank/Function knob to select Bank. control by using the punchpad to adjust the clip and gain settings while recording the Ultrix Acuity Operation Manual (v11.1) — Custom Controls • 87...
7. Press Background or Foreground and select the color you want to apply to that component of the mnemonics. ® • Acuity Colors — use a standard Acuity mnemonics color. 88 • Custom Controls — Ultrix Acuity Operation Manual (v11.1)
The Custom Control Shot Box Module provides you may have to press the button a number of time to get 28 buttons that can mapped to custom controls to CC Global Recall. Ultrix Acuity Operation Manual (v11.1) — Custom Controls • 89...
If the custom control button is grayed out, to run that custom control. For example, if we the custom control menu is being displayed again record a relative custom control on ME 2, 90 • Custom Controls — Ultrix Acuity Operation Manual (v11.1)
All the custom controls will continue to setting of the audio fader map. play out until they reach the end, or loop. Ultrix Acuity Operation Manual (v11.1) — Custom Controls • 91...
You can use the Audio 2. Use the PFL knob to turn Channel Off for either the PFL on (ON) or off (OFF). program or preset buses. 92 • Custom Controls — Ultrix Acuity Operation Manual (v11.1)
• Use the Group knob to select the audio group that you want to switch to the A or B side for. Audio Server Press Insert Event > More > Audio Server. Ultrix Acuity Operation Manual (v11.1) — Custom Controls • 93...
Run Held Group B another custom control. event is triggered. Notify End CC For internal use only. Only use this event if instructed to do so by Ross Video Technical Support. 94 • Custom Controls — Ultrix Acuity Operation Manual (v11.1)
Press Layer On and use the Layer knob to enter a new layer. Seq Next Select the previous effect in the sequence. Seq Prev Select the next effect in the sequence. Ultrix Acuity Operation Manual (v11.1) — Custom Controls • 95...
(simulated a shuttle reverse). the GPI input you want to apply Stop Send the stop command to the DVE. the function to. GPI/Tallies Press Insert Event > More > More > GPO/Tally. 96 • Custom Controls — Ultrix Acuity Operation Manual (v11.1)
Send the command to OverDrive ® & Prep take the current shot on-air and prepare the next shot in the rundown. Monitor Wall Press Insert Event > More > Monitor Wall. Ultrix Acuity Operation Manual (v11.1) — Custom Controls • 97...
Prepare a camera move on a particular the template you want to load. camera. Use the Shot knob to select the move you want to prepare. Perform a fade to black transition. 98 • Custom Controls — Ultrix Acuity Operation Manual (v11.1)
Page 99
Select the ME X(s) that you want to perform the transition on. MECUT Perform a cut on the selected ME. Select the ME X(s) that you want to perform the transition on. Ultrix Acuity Operation Manual (v11.1) — Custom Controls • 99...
Page 100
Press Take ID and use the Take transition you want to perform. ID knob to select the take id for the template you want to load. TypeInCmd Enter a manual RossTalk command. 100 • Custom Controls — Ultrix Acuity Operation Manual (v11.1)
Active knob to turn key over on (Enable) or off (Disable). Keys Cut Cut keys on or off on a particular ME. Ultrix Acuity Operation Manual (v11.1) — Custom Controls • 101...
Refresh the clip list from the device set from the VTR, and not from the and select a clip to cue. switcher. • Use the ClipList knobs to select the clip you want to cue. 102 • Custom Controls — Ultrix Acuity Operation Manual (v11.1)
• Press the custom control button for the both the router and switcher names for a source, or only custom control you want to stop. This applies the router names. Ultrix Acuity Operation Manual (v11.1) — Custom Controls • 103...
• User Colors — use a User Color. Event Down move the selected event down one item in the list. • TouchDrive Colors — use a standard TouchDrive mnemonics color. 104 • Custom Controls — Ultrix Acuity Operation Manual (v11.1)
Note: If you are editing a Relative Custom Control, control and then waits the preroll time <relative> appears next to the Bank and Button before performing the transition. Ultrix Acuity Operation Manual (v11.1) — Custom Controls • 105...
3. Use the Bank and Macro knob to select the custom control that you want to attach to the selected button. Ultrix Acuity Operation Manual (v11.1) — Custom Controls • 107...
Page 108
• Stop All CCs — control that is at as many groups as Double-Press the Stop hold. there are available button. custom control buttons on the bus. 108 • Custom Controls — Ultrix Acuity Operation Manual (v11.1)
Bank you need to sync with a satellite feed. You can button is held. then adjust that variable for changes in latency, Ultrix Acuity Operation Manual (v11.1) — Custom Controls • 109...
• == — if X equals Y return true. executed. If the expression returns false the • != — if X does not equal Y return true. 110 • Custom Controls — Ultrix Acuity Operation Manual (v11.1)
Page 111
7. Insert the custom control events you want to execute when the logical expression returns TRUE. Tip: You can also nest another If event within the current event. 8. Use the Event knob to select Else. Ultrix Acuity Operation Manual (v11.1) — Custom Controls • 111...
Use the Speed knob to select the rate at which ripples move along the vertical sides the pattern continuously rotates. of the pattern (Animation must be 112 • Patterns and Mattes — Ultrix Acuity Operation Manual (v11.1)
To Set Up a Matte 1. Press HOME > More > Effects > BKGD Gen Setup and use the ME and Generator knobs to select the background generator you want Ultrix Acuity Operation Manual (v11.1) — Patterns and Mattes • 113...
Panel are assigned as custom control shot box buttons, allowing you to access the first 14 custom controls from the shot box pages. Shot Box Pages are assigned to the Auxiliary Control 114 • Auxiliary Control Panels — Ultrix Acuity Operation Manual (v11.1)
4. Source — select the source that you want connected to. to assign to the selected bus. 8. Tap Acuity > Slot 0: Acuity and tap AUX to open that tab. Ultrix Acuity Operation Manual (v11.1) — Ultritouch • 115...
Point your • Smaller Zoom Steps — reduce the rate file explorer to the localdisk folder on the for zooming in/out from the panel. server (\\ ##.##.##.## \localdisk). The 116 • Virtual Panels — Ultrix Acuity Operation Manual (v11.1)
• Set Function on Bttn — Point to this item and click the special command that you want Right-click on the ROW X button to assign the to assign to the button. panel row to a different switcher row. Ultrix Acuity Operation Manual (v11.1) — Virtual Panels • 117...
ME that the row is assigned to. • Set Map to Default — Point to this item and click the bus map you want to default. 118 • Virtual Panels — Ultrix Acuity Operation Manual (v11.1)
• Delete Workspace — delete all keyframes spline through the current keyframe. in the sequence. Increased bias places more importance on the smoothness between the previous and current points, while a decreased Ultrix Acuity Operation Manual (v11.1) — DVE Sequences • 119...
4. Press Save Sequence to save the sequence running (On), or always moves in one to the selected register. direction (Off). 120 • DVE Sequences — Ultrix Acuity Operation Manual (v11.1)
SEQ. The DVE Sequence Runtime menu shows all the sequences on the keys you have selected. Each sequence can be run and paused independently except when the sequence is being run from the fader. Ultrix Acuity Operation Manual (v11.1) — DVE Sequences • 121...
• Moving below the center point locates the channel in -Y space. Changing the position of an key in 3D space does not change the pivot point. The pivot point is 122 • Working in 3D Space — Ultrix Acuity Operation Manual (v11.1)
The key rotates about the Z-Axis. A positive rotation will spin the key clockwise and a negative rotation will spin the image counter-clockwise. – Z Axis Figure 23: Z-Axis Rotation Ultrix Acuity Operation Manual (v11.1) — Working in 3D Space • 123...
Rotary wipes, unlike Classic wipes, involve rotation of a pattern to reveal the destination source. Matrix Matrix wipes use a series of blocks to create the pattern for the wipe. 124 • Pre-Loaded Effects — Ultrix Acuity Operation Manual (v11.1)
Note that the Shadow and considered part of the Foreground area. These translucent areas (see below) are completely are typically the pixels near the edge of the contained within the Background area. Ultrix Acuity Operation Manual (v11.1) — Glossary • 125...
Page 126
The more rotation applied, the component from the output video signal. further around the wheel colors are shifted. 126 • Glossary — Ultrix Acuity Operation Manual (v11.1)
Page 127
A keyer capable of a linear key converts the key signal voltage directly to the transparency effect on the screen. Ultrix Acuity Operation Manual (v11.1) — Glossary • 127...
Page 128
Shades of gray are translated into transparency levels, giving the key a soft edge. Unshaped Key alphas can also be considered true linear alphas. Key alphas are set to unshaped by default. 128 • Glossary — Ultrix Acuity Operation Manual (v11.1)
CG GPI Looping CHNL MGMT Button Muting Chroma Key Trim CHROMA KEY Button AUTO SELECT Button Classic Wipes Auto Select Key Clean Feed Auto Transition 46–47 CLEAR Button Auto-Follow CLEAR Buttons Ultrix Acuity Operation Manual (v11.1) — Index • 129...
Page 130
Special, Assign Fader Special, MEAUTO Special, Assign Monitor Wall Channel Special, MECUT Special, Audio All Off Special, MEM Special, Audio CH Off Special, Memory Recall Special, Audio CH On Special, MEMSAVE 130 • Index — Ultrix Acuity Operation Manual (v11.1)
Page 131
DVE Button Special, Set Show DVE Channel Management Special, Set Split ME DVE Sequences 119–121 Special, Set Xpt Creating Special, SETVIDMODE Load and Save Special, SpyderBPR Running Special, SpyderFKR Running Multiple Ultrix Acuity Operation Manual (v11.1) — Index • 131...
Need help?
Do you have a question about the Ultrix Acuity and is the answer not in the manual?
Questions and answers