Clearing A Function From A Button - Ross Ultricore RCP-ME User Manual

3. In the Button list, select Function Key.
4. In the Value field, select Panel Lock as the function to assign to this button.
5. Close the Button dialog.
The simulated RCP-ME in DashBoard shows the lock on the selected button.

Clearing a Function from a Button

If a button is not used for any function it should be unassigned.
To clear a function from a button
1. Open the RCP-ME Panel Config interface (see "To open the RCP-ME Panel Config interface" on page 22).
2. On the simulated RCP-ME, select the button from which you want to clear a function.
The Button dialog opens.
3. In the Button list, select Clear Key.
4. Close the Button dialog.
The simulated RCP-ME in DashBoard shows UN-ASN on the selected button.
5. Send the current configuration file to the device (see "To send the current configuration to a panel" on
page 74).
50 • Functions RCP-ME User Guide (v4.0)