Managing Panel Configurations; Saving The Current Configuration For The Rcp-Me - Ross Ultricore RCP-ME User Manual

Managing Panel Configurations

The parameters that you have set up on the Panel Config interface for an RCP-ME are stored to a configuration file
on your DashBoard client PC. A configuration file can be recalled and applied to other remote control panels
communicating with your DashBoard client PC.

Saving the Current Configuration for the RCP-ME

When you have finished making changes to the configuration of the RCP-ME, you should save the configuration
file and then add the location of this file to the File Navigator pane so that you can open it later.
To save a new configuration file
1. Select the Panel Config interface containing the configuration that you want to save.
2. From the main toolbar in DashBoard, click
3. Navigate to the folder in which you want to save the configuration file.

The default location is Desktop\Documents.
4. Click .
Save
To save an existing configuration
1. Select the Panel Config interface containing the configuration that you want to save.
2. In the File Navigator pane, select the configuration file to which you want to save the current configuration.
3. Click to save the current configuration.
Adding a Directory to File Navigator Pane
You can create a directory (folder) in the tree view in the File Navigator pane in the DashBoard window to store
your configuration files. This enables you to group configuration files into a single folder, allowing quick access to
your files. This method is optional, you can still access your configuration files without creating a directory in the
File Navigator pane.
For More Information on...
• the File Navigator pane in DashBoard, refer to the DashBoard User Manual.
To add the configuration file location to the File Navigator panel
1. Display the File Navigator pane in the DashBoard window as follows:
a. Click Views in the DashBoard main toolbar.
b. Click File Navigator.
The File Navigator pane displays in the lower left corner of the DashBoard window.
2. In the toolbar of the File Navigator pane, click
The Browse For Folder window opens.
3. Navigate to the folder where you saved the configuration file.
4. Select the folder.
RCP-ME User Guide (v4.0)
( ) to save the current configuration.
Save As
.
Managing Panel Configurations • 73