Ross TouchDrive TD3 Upgrade

TouchDrive 3.0.1
• Release Date: February, 2024.
Important:
License Agreement before installing or using this
software.
Important:
Ultrix Acuity frame you must switch it to Carbonite
mode, perform the upgrade, and then switch it back
to Acuity
®
Qseven and SGET are trademarks or registered
trademarks of Standardization Group for
Embedded Technologies e.V. (SGET).
AMD, Ryzen
trademarks of Advanced Micro Devices, Inc.
Feature Enhancements
A number of features have been added, or
updated, to this version of software. This section
provides a brief introduction to these features,
and how to use them.
v3.0.1 Features
No New Features
This version of software fixes a number of bugs
and does not introduce any new features.
v3.0.0 Features
TouchDrive 3 and 4 Panels
Support has been added for the new 35
crosspoint TD3 and TD4 panels. These new
panels come with a number of new and updated
areas to better enhance operation.
TD3 Panel
© 2024 Ross Video Limited. Ross ® and any related marks are trademarks or registered trademarks of Ross Video Limited. All other trademarks are the property of their respective companies. PATENTS ISSUED and PENDING. All rights reserved. No part of
this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, mechanical, photocopying, recording or otherwise, without the prior written permission of Ross Video. While every precaution has been taken
in the preparation of this document, Ross Video assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein.
Please review the End User Software
If your TouchDrive is connected to an
® mode.
™
, and combinations thereof are
Upgrade Notes
TD4 Panel
Flex Control
The new Flex Control module on these panels
is made up of user selectable buttons with
integrated displays. Similar to user buttons on
the panel row, these buttons can be have various
functions assigned to them from the same User
Button Assignment menu.
Positioner
The Positioner area on these panels has been
expanded to include a bank of user selectable
buttons with integrated displays, the same as
on the Flex Control modules.
Addition Row Control
A vertical Row Control area has been added to
the left side of the source row on these panels.
The two areas mirror each other and allow you
to access the row control from either end of the
panel.
Double 3-knob menu Menu
The new stacked version of the 3-knob menu
operates the same as on the other panels, but
can show two menu pages at the same time.
Bugs Addressed
The following bugs were addressed in this
version of software:
HWRev02 (Qseven ® )
• No bugs were addressed in this version of
software.
HWRev03 / 4882AR Series (AMD Ryzen ™ )
4880DR-500-03.0.1