Belts - Husqvarna 112C5 Workshop Manual

8. If it is necessary to replace the bearing, tap out of
the bushing (F) from the bearing.
9. Pull up the steering column (C) and move the lower
end in front of the steering chain (D).

9.9 Belts

9.9.1 Belts overview
Engine belt
1
2 Transmission belt
3 Main belt
4 Equipment belt
1342 - 001 - 09.03.2020
C
D
1
3
2
Engine pulley to intermediate
pulley
Transmission pulley to inter-
mediate pulley
Intermediate pulley to clutch
pulley
Clutch pulley to cutting deck
10. Pull down the steering column (C) in front of the
frame.
11. Install in the opposite sequence.
4
9.9.2 To replace the engine belt
1. Remove the engine cover. Refer to
engine cover on page 21 .
2. Remove the engine side covers. Refer to
the engine side covers 115C on page 21 .
3. Remove the fuel tank cover. Refer to
fuel tank cover on page 21 .
To remove the
To remove
To remove the
Repair instructions - 43