Download  Print this page

Maintenance; Maintenance Schedule For The Service Center - Husqvarna 112C5 Workshop Manual

Hide thumbs

Advertisement

6.1 Maintenance schedule for the service
center
1. PREPARE THE PRODUCT
Do a check of the battery.
Do a check of the blades.
Do a check of the belts and pulleys.
Do a check of the steering chain of the inner side of the frame tunnel.
Do an inspection, lubricate and adjust all wires.
Make sure that all screws and nuts are tightened with the correct torque.
Lubricate the operators seat.
Lubricate the wheels and blade bearings on the cutting deck.
Lubricate the pedals on the inner side of the frame tunnel.
Lubricate the belt tensioners.
2. ENGINE
Do a check of the fuel hose. Replace if it is necessary.
Replace the fuel filter.
Replace the prefilter and paper filter in the air filter.
Clean the engine and the hydrostatic transmission.
Do an inspection of the cooling fins on the hydrostatic transmission.
Do a check of the muffler and the heat deflector.
Replace the engine oil. Refer to
Replace the engine oil filter.
Replace the spark plug.
Do a check of the battery and charge if it is necessary.
3. TRANSMISSION, CONTROLS AND DRIVE SYSTEM
Make sure that the tire pressure is correct. Refer to
Examine and adjust the parking brake.
1342 - 001 - 09.03.2020

6 Maintenance

To do a check of the engine oil level on page 10 .
Wheels on page 8 .
First servicing
Maintenance
interval in
hours
50
100
O
O
O
O
O
O
O
O
O
O
O
O
First servicing
Maintenance
interval in
hours
50
100
O
O
Clean
O
O
O
O
O
O
O
O
O
O
O
O
First servicing
Maintenance
interval in
hours
50
100
O
O
O
O
Maintenance - 13

Advertisement

loading

  Also See for Husqvarna 112C5

  Related Manuals for Husqvarna 112C5

This manual is also suitable for:

112c115c