Steering; Cutting Deck - Husqvarna 112C5 Workshop Manual

operator can change the gear directly from neutral
position to fifth gear without stop at each gear between
those positions.
The hydrostatic transmission in the models 112C, 115C
gives the operator full control of the product. The
operator controls the speed with the forward and
rearward pedals.

8.6 Steering

The product has articulated steering. Movement from
the steering wheel is moved to the rear axle through
chains and wires.
The turning radius with articulated steering is very small.
Diagram of articulated steering function.
18 - Function overview

8.7 Cutting deck

The product cuts satisfactorily in small spaces because
of the front attached cutting deck.
The Combi Deck operates with BioClip or rear
discharge. When the BioClip plug is removed, the
cutting deck ejects the grass rearward.
1342 - 001 - 09.03.2020