4. CUTTING EQUIPMENT
Clean the outer and inner surfaces of the cutting deck and the cutting deck covers.
Do a check of and adjust the cutting height.
5. LAST INSPECTION AND DOCUMENTATION
Do a check of and adjust the engine speed, rpm. Refer to
50 .
Make sure that the product does not move in neutral position.
Do a check of the forward drive and the rearward drive on different speeds.
Do a check of the blade engagement, seat, lift and forward drive/brake. Refer to
Operation conditions on page 12 .
14 - Maintenance
Technical data on page
First servicing
Maintenance
interval in
hours
50
100
O
O
O
O
First servicing
Maintenance
interval in
hours
50
100
O
O
O
O
O
O
O
O
1342 - 001 - 09.03.2020