Husqvarna 112C5 Workshop Manual page 46

8. Remove the front end of the transmission belt.
9. Install in the opposite sequence.
9.9.5 To replace the main belt
Note: There is a cutting deck brake on model 115C only.
1. Remove the engine cover. Refer to
engine cover on page 21 .
2. Remove the engine side covers. Refer to
the engine side covers 115C on page 21 .
3. Remove the fuel tank cover. Refer to
fuel tank cover on page 21 .
4. Remove the frame cover. Refer to
install the frame cover on page 20 .
5. Remove the side covers. Refer to
install the side covers on page 21 .
6. Remove the engine belt. Refer to
engine belt on page 43 .
7. Remove the transmission belt. Refer to
the transmission belt 112C, 115C on page 44 .
8. Remove the chain from the lever.
46 - Repair instructions
9. Move the main belt from the tension pulley.
10. Remove the brake spring.
To remove the
To remove
To remove the
To remove and
To remove and
To replace the
11. Remove the screw and the brake.
To replace
1342 - 001 - 09.03.2020