Husqvarna 112C5 Workshop Manual page 44

4. Remove the spring for the engine belt with a spring
hook.
5. Remove the screw and the belt tensioner.
6. Remove the front end of the engine belt.
44 - Repair instructions
7. Remove the rear end of the engine belt.
8. Install in the opposite sequence.
9.9.3 To replace the transmission belt 112C, 115C
1. Remove the engine cover. Refer to
engine cover on page 21 .
2. Remove the engine side covers. Refer to
the engine side covers 115C on page 21 .
3. Remove the fuel tank cover. Refer to
fuel tank cover on page 21 .
4. Remove the engine belt. Refer to
engine belt on page 43 .
5. Loosen the spring for the transmission belt with a
spring hook.
To remove the
To remove
To remove the
To replace the
1342 - 001 - 09.03.2020