Husqvarna 112C5 Workshop Manual page 47

12. Remove the main belt.
13. Install in the opposite sequence.
9.9.6 To replace the equipment belt
1. Remove the cutting deck. Refer to
cutting deck on page 9 .
2. Lift the product with a jack assembly.
3. Remove the left front wheel. Refer to
install the wheels on page 23 .
4. Remove the main belt. Refer to
belt on page 46 .
5. Remove the equipment belt from the pulley.
1342 - 001 - 09.03.2020
To remove the
To remove and
To replace the main
6. Pull out the belt from the front of the product.
7. Install in the opposite sequence.
Repair instructions - 47