Programming Procedure - NEC NEAX 2000 IPS Maintenance Manual

Programming Procedure

Example
Point Code: 10011
PBX No. : 0003
Local Office
PBX
number
Local Office:
The fault information and PBX
number are sent to the center office.
For CCIS programming, refer to the CCIS System Manual.
For IP programming, refer to the IP System Manual or NEAX 2000 IPS System Manual.
For Center Office
START
Assign the Originating Point Code (OPC)
CMA7
for the center office.
NOTE 1:
NOTE 2:
A
Point Code: 10010
PBX No. : 0002
Local Office
DESCRIPTION
CCH/IPT No.0 must be assigned
for Centralized MAT in center of-
fice.
The Originating Point Code is
used to designate an originating
office in CCIS/IPT network. A
single OPC should be assigned to
all CCH/IPT numbers provided
in the same office.
CHAPTER 1 MAINTENANCE SERVICE FEATURES
Point Code: 10000
PBX No.
Center Office
PBX
number
(CME3 Y=02
is assigned)
PBX No.
POINT CODE
0001
0002
0003
Center Office:
PBX number is converted to Point
Code according to the data assigned
by CME3 Y=02.
• Y=01
(1) 0-7 : CCH/IPT No.0-7
(2) 00001-16367: OPC
– 56 –
CENTRALIZED MAT
: 0001
Point Code
Centralized MAT:
Each office in the
network is recognized
by the Point Code.
10000
10010
10011
DATA
NWA-008847-001 Rev.3.0
NOTE 1
NOTE 2
a6ch1001.fm