Service Conditions; Programming Procedure - NEC NEAX 2000 IPS Maintenance Manual

Service Conditions

(1) Number of lost packets, CODEC type, and Payload size are displayed with pressing the Function key
that has been set during a communication.
(2) The displayed QoS information on the LCD is updated every 5 seconds.
(3) All information sent from the PBX is not displayed while the QoS information is displayed on the
LCD.
(4) To stop the display of QoS information, press Soft key of Exit. If you do not that, the QoS
information will keep being displayed.
(5) This feature is available for the D

Programming Procedure

START
CM90 Assign the QoS Display key to the D
END
term
IP version 2.81 or later.
DESCRIPTION
term
CHAPTER 1 MAINTENANCE SERVICE FEATURES
IP. • Y=00
(1) My Line No. +
(2) F1058: QoS Display on
– 103 –
term
QoS DISPLAY ON D
DATA
,
+ Key No.
term
D IP
NWA-008847-001 Rev.3.0
a6ch1001.fm
OCTOBER/14/2005
IP