Mp Program Download (Ftp); General Description; Service Conditions; Programming Procedure - NEC NEAX 2000 IPS Maintenance Manual

MP PROGRAM DOWNLOAD (FTP)

General Description

This feature enables the maintenance person to download the MP upgrade program from FTP sever to the
2000 IPS MP Card of Main Site/Remote Site with the PBX on-line.
NOTE:
MP program download for Remote Site is available from Series 3700 R12.2 software.
You can install the MP program to the FTP server on a LAN and designate the "Downloading the Program
to PBX" to the FTP server from the MAT that is established remotely on the LAN.
By using MATWorX program in the MAT, you can designate the following.
• Program Download
• Program Change (Program Changeover/Changeback, Program Version Matching)

Service Conditions

Refer to the Software Upgrade Guide.

Programming Procedure

To execute the remote downloading of MP program by MOC mode of MAT/CAT, do either of the follow-
ing programming in accordance with the software version used.
• Remote Download for Main Site
• Remote Download for Main Site/Remote Site
Page 71
For the setting/operation of MATWorX in the remote program downloading (Main Site), refer to the Soft-
ware Upgrade Guide.
For the office data of fault information display, refer to
When you require password service, do the programming of Customer Administration Terminal in Feature
Programming Manual.
CHAPTER 1 MAINTENANCE SERVICE FEATURES
[Series 3500 software required]
[Series 3700 R12.2 software required]
"FAULT
– 61 –

MP PROGRAM DOWNLOAD (FTP)

Page 62
Page 10
MESSAGE".
NWA-008847-001 Rev.3.0
a6ch1001.fm
JULY/01/2006