How To Read This Chapter - NEC NEAX 2000 IPS Maintenance Manual

HOW TO READ THIS CHAPTER

In the programming procedure, the meaning of (1), (2) and marking are as follows:
(1): 1st Data
(2): 2nd Data
: Initial Data
With the system data clear command (CM00, CM01), the data with this marking is automatically
assigned for each command.
OFF LINE : Command with this marking can be used only under Off-Line mode of the MP card.
To set Off-Line mode,
(1) Set SW3 on the MP card to "2" or "3".
(2) Press SW1 on the MP card.
CHAPTER 1 MAINTENANCE SERVICE FEATURES
– 6 –

HOW TO READ THIS CHAPTER

NWA-008847-001 Rev.3.0
a6ch1001.fm