Operating Procedure - NEC NEAX 2000 IPS Maintenance Manual

Operating Procedure

• To display fault messages and clear the alarms of PBX
Operation:
Use Fault Display Add-In of MATWorX.
See Operating Procedure in
• To display the PBX number set to each Point Code
Operation:
Use MOC Add-In of MATWorX.
ST COMMAND=
E303 +
DE E303>
XXXXX +
DE XXXXX : XXXX
(Point Code)
For operation of Centralized MAT, refer to the Centralized MAT User Guide.
CHAPTER 1 MAINTENANCE SERVICE FEATURES
"FAULT MESSAGE".
PBX No.
Point Code
– 60 –
Page 21
CENTRALIZED MAT
NWA-008847-001 Rev.3.0
a6ch1001.fm