NEC NEAX 2000 IPS Maintenance Manual page 108

A
Provide the call log collection with the IP-CS.
CMAD
NOTE: When changing this data for IP-CS
accommodated in a remote site, exe-
cute the office data copy by CMEC
Y=8 to the remote site.
Provide the fault log collection with the IP-CS.
CMEA Specify the output destination for the fault
logs/call logs.
NOTE: Set the output port for fault logs/call
logs by CM40 Y=00.
Specify the collection method of fault logs/call
logs.
Specify whether fault logs are collected when
term
the D IPs/IP-CSs login to the system or the
IP-PAD is in online status.
NOTE: When setting the second data to 1,
fault kind 49 (IP component reset
occurrence) is not registered.
CM40 Specify the RS port to collect VoIP log.
Specify the data length for the RS port.
NOTE: When using MP RS-232C port for
MAT, set the initial data.
B
DESCRIPTION
CHAPTER 1 MAINTENANCE SERVICE FEATURES
• Y=40
(1) 000-255: IP-CS No.
(2) 0 : To provide
1 : Not provided
• Y=41
(1) 000-255: IP-CS No.
(2) 0 : Not provided
1 : To provide
• Y=6
(1) 00: Output destination of logs
(2) 2 : RS port of MP
3 : Not output
• Y=6
(1) 02: Collection method of logs
(2) 0 : Not overwritten
1 : Overwrite
• Y=6
(1) 10: Fault log collection
(2) 0 : To collect
1 : Not collected
• Y=00
(1) 0: RS0 port
1: RS1 port
(2) 08
NONE : No data
• Y=01
(1) 0: RS0 port
1: RS1 port
(2) 0 : 7 bit
1 : 8 bit
– 98 –
VoIP LOG COLLECTION
DATA
: VoIP log collection
NWA-008847-001 Rev.3.0
OCTOBER/14/2005
a6ch1001.fm