Operating Procedure - NEC NEAX 2000 IPS Maintenance Manual

A
Assign the outgoing access code and called
CM72
party number to Memory Slot number allo-
cated by CM71.
Assign which kind of fault information is
CMEA
stored into the fault information memory,
and which kind of alarm is indicated.
Specify the alarm kind sent automatically
to the RMAT.
Assign the office number sent to the
RMAT.
Specify the destination of fault information
as RMAT.
END

Operating Procedure

Refer to the IMX or IPX RMAT Operation Manual.
DESCRIPTION
CHAPTER 1 MAINTENANCE SERVICE FEATURES
• Y=0
(1) 000-299: Memory Slot No.
(2) Outgoing Access Code (Maximum 4
digits) +
mum 26 digits)
• Y=2
(1) See "FAULT MESSAGE"
(2) CHAPTER 1.
• Y=3
(1) 00 : MJ alarm
01 : MN alarm
02 : - - alarm
(2) 0 : Send
1 : Not sent
• Y= 4
(1) 00 : Office number sent to RMAT
(2) 00-999: Office No.00-999
• Y=4
(1) 01 : Destination of fault information
(2) 3 : IMX MAT or Centralized MAT
and RMAT
7 : RMAT
– 52 –
REMOTE MAT
DATA
,
+ Called Party No. (Maxi-
of
Page 10
NWA-008847-001 Rev.3.0
a6ch1001.fm