Network - Extron electronics TouchLink TLI Pro 101 User Manual

Network

Verify with your network administrator whether the IP address for the TLI is assigned by
Dynamic Host Configuration Protocol (DHCP) or set manually. If they are set manually, you
need to obtain an IP address, a subnet mask, a gateway address, and a Domain Name Server
(DNS) IP address from the network administrator.
Status
Host Name:
IP Address:
Subnet Mask:
Gateway:
Figure 7.
1.
If IP addresses are assigned by DHCP, press
yellow. If DHCP is selected, you are able to set only the Host Name and the DNS IP
address. All other values are set by the DHCP server.
If IP addresses are assigned manually, press
edited.
2.
Edit the
Figure 8.
Use the keypad to enter a new name, which appears in the
z
Use the backspace character (
z
The right and left arrows move the cursor inside the
z
Click the
z
Press
z
Network Output Audio
DHCP
On Off
XYZ-123-AB-CD-EF DNS Primary:
192.168.254.254 Domain Name:
255.255.0.0 Mac Address:
0.0.0.0
Network Screen
by pressing that button. A keypad opens:
Host Name
Alphanumeric Keypad
key to toggle between upper and lower case letters.
Shift
to save the new name.
Enter
Input Advanced Exit
192.168.254.253
abcdefghijklmnop...
xx-xx-xx-xx-xx-xx
Revert Apply
On . The selected button is highlighted in
. When DHCP is off, all values can be
Off
Host Name
) to delete existing characters.
Host Name
TLI Pro 101 • On-screen Menus
text box.
text box.
14