Input; Custom - Extron electronics TouchLink TLI Pro 101 User Manual

Input

Status
Figure 14.
Input EDID
The EDID file is stored by the interface and passed to the video source to ensure that the
signal generated by the source is compatible with the display. It determines the resolution and
refresh rate of the signal produced by the video source.
Press one of the three
interface and passed to the video source:
Match Output
the display connected to the HDMI output.
Project Resolution
altered only by changing the GUI Designer project file.
Show More Resolutions
the resolution and refresh rate for the EDID that will be used.
1024 x 768
1280 x 1024
1600 x 1200
1920 x 1200
720p
Figure 15.
1. Select the resolution and refresh rate from the lists.
2.
Click OK
Network Output Audio
Input EDID
Current Native:
1024x768 @ 60Hz
Input
Audio:
Change Native To:
Match Output
HDCP
1080p @ 60Hz Authorize:
Aspect
Project Resolution
Ratio:
1080p @ 60Hz
Other
Resolutions
Input Screen
Input EDID buttons to determine which EDID will be stored by the
(default setting) — The EDID matches the native resolution and refresh rate of
— The EDID is the one set in the GUI Designer project and can be
— Opens a dialog (see figure 15, below) that allows you to select
Custom EDID
Resolution
Custom EDID Dialog
to save this EDID or click Cancel
Input Advanced Exit
Input Audio and Video
On Off
On Off
Fill Follow
Adjust Picture
Refresh Rate (Hz)
23.98
24
25
29.97
30
OK Cancel
to close the dialog without changing the EDID.
TLI Pro 101 • On-screen Menus 19