Network - Extron electronics TouchLink Pro User Manual

Network

Verify with your network administrator whether the IP address for the touchpanel is assigned by
Dynamic Host Configuration Protocol (DHCP) or set manually. If they are set manually, you need
to obtain an IP address, a subnet mask, a gateway address, and a Domain Name Server (DNS)
from the network administrator.
Press the
Network
screen.
Status
Host Name:
IP Address:
Subnet Mask:
Gateway:
Figure 7.
1.
If IP addresses are assigned by DHCP, press
When DHCP is off, the
•
addresses can be edited (as shown in figure 7).
When DHCP is on, the
•
and cannot be edited because they are set by the DHCP server.
If IP addresses are assigned manually, press
2.
If DHCP is on, you can edit the
Figure 8.
Use the keypad to enter a new name, which appears in the
•
Use the backspace character ( x ) to delete existing characters.
•
The right and left arrows move the cursor inside the
•
Click the
•
Press
•
button in the navigation panel at the top of the screen to open the
Display Audio
Network
DHCP
On Off
DNS Primary:
TLP-AB-CD-EF
Domain Name:
192.168.254.251
MAC Address:
255.255.255.0
0.0.0.0
Network Screen
Host Name
Host Name
Host Name
Alphanumeric Keypad
key to toggle between upper and lower case letters.
Shift
Enter to save the new name.
TLP Pro 525, 725, and 1025 Series Touchpanels • On-screen Menus
Advanced Exit
127.0.0.1
00-05-A6-AB-CD-EF
Revert Apply
. The selected button is highlighted in yellow.
On
is grayed out and cannot be edited. All
can be edited. The addresses are grayed out
.
Off
by pressing that button. A keypad opens:
Host Name
text box.
Host Name
Network
text box.
15