Output; 1024X768; 1280X1024; 1600X1200 - Extron electronics TouchLink TLI Pro 101 User Manual

Output

Sets the Display Resolution,
to be shown.
Status
Resolution
Current Output:
1024x768 @ 60Hz
Set Display
Display Native
1280x1024 @ 60Hz
Project Resolution
1080p @ 60Hz
Show More
Resolutions
Figure 10.
Resolution
The
Resolution
offers three main options for setting the resolution of the TouchPanel display.
Click
Display Native
z
resolution of the display device.
Click
Project Resolution
z
resolution of the TLI Pro 101 output.
Click
Show More Resolutions
z
1024 x 768
1280 x 1024
1600 x 1200
1920 x 1200

720p

Figure 11.
When the panel opens, by default,
EDID files are available are listed on the left. When a resolution is selected, the list of
refresh rates available for that resolution can be seen on the right.
Click
Show All
interface (for a complete list, see
Sleep Timer, and
Network Audio
Output
Sleep Timer
2
3
4
min.
On Off
Test Pattern
Show
Output Screen
panel shows the current resolution of the TLI Pro 101 output signal and
to set the resolution of the TLI Pro 101 output to the native
to use an imported GUI Designer project to set the
for more options:
TLI Output Resolution and Refresh Rate
Resolution Refresh Rate (Hz)
50
60
75
Resolution List
Use Show
EDID All
TLI Pro 101 Output Resolution and Refresh Rate
Use EDID
to display all the resolutions and refresh rates supported by the
Screen Resolutions
Display Timer and enables a
Input Advanced
Exit
Display Timer
2
3
4
min.
On Off
OK Cancel
is selected. The resolutions for which
on page 9).
TLI Pro 101 • On-screen Menus
Test Pattern
16