Network - Extron electronics TLP Pro 525 Series User Manual

Network

Verify with your network administrator whether the IP address for the touchpanel is assigned by
Dynamic Host Configuration Protocol (DHCP) or set manually. If they are set manually, you need
to obtain an IP address, a subnet mask, a gateway address, and a Domain Name Server (DNS)
from the network administrator.
Press the
Network
screen.
Status
Host Name:
IP Address:
Subnet Mask:
Gateway:
Figure 7.
1.
If IP addresses are assigned by DHCP, press
press
When DHCP is off, the
•
addresses can be edited (as shown in figure 7).
When DHCP is on, the
•
and cannot be edited because they are set by the DHCP server.
2.
If DHCP is on, press the
box opens:
Figure 8.
Use the keypad to enter a new name, which appears in the
button in the navigation panel at the top of the screen to open the
Display
Network
DHCP
On Off
DNS Primary:
TLP-AB-CD-EF
Domain Name:
192.168.254.251
MAC Address:
255.255.255.0
0.0.0.0
Network Screen
.
Off
Host Name
Host Name
Host Name
Alphanumeric Keypad
TLP Pro 525, 725, and 1025 Series Touchpanels • On-screen Menus
Audio Advanced Exit
127.0.0.1
00-05-A6-AB-CD-EF
Revert Apply
If IP addresses are assigned manually,
.
On
is grayed out and cannot be edited. All
can be edited. The addresses are grayed out
button to edit the host name. The
Host Name
Network
dialog
Host Name
text box.
15