Advanced - Extron electronics TouchLink TLI Pro 101 User Manual

Advanced

The Advanced window provides additional information about the interface and the
GUI Designer project that is uploaded to it.
Status
Touchpanel Name:
Controller Name:
Controller IP:
Global Configurator Project:
Name:
Version:
Creation Date:
Revision Date:
On
Figure 17.
System and GUI Project Panels
These panels are read only, providing information about the system, the Global Configurator
Project, and the GUI Designer Project.
Menu PIN
The PIN setup options allow you to enable, disable, or change the setup menu PIN. The PIN is
a 4-digit number. Each digit can have any value from 0-9.
1. Select the first digit of the PIN. When selected, it is highlighted in yellow.
Figure 18.
2.
Press a number on the keypad. That number appears in the PIN.
3.
Repeat steps 1 and 2 for the other 3 digits.
4.
The title bar changes to Confirm New Menu Pin.
5.
Enter the PIN a second time. When the PIN entered on the second occasion matches the
PIN entered on the first occasion, the PIN is set and the dialog closes.
Network Output Audio
System
TLI Pro 101 192.168.254.253 Room Name:
Resolution:
IPCP Pro 550 192.168.254.254
Creation Date:
192.168.254.254
Revision Date:
Version:
GCPro Project.gcpro
0.0.2.0
Project Size:
5/13/2013 9:10:39 AM
Storage Size:
1/10/2014 10:15:36 AM
Project Usage:
Menu Pin
Off Change
Advanced Screen
IP Address
1 2 3 4
Back
1 2 3
4 5 6
8
7 9
0
Cancel
Numeric Keypad for Setting PIN
Input Advanced Exit
GUI Project
Project2.gdl
1920x1080
2/25/2014 9:22:41 AM
2/25/2014 9:26:30 AM
0.0.0
3 MB
221 MB
1%
TLI Pro 101 • On-screen Menus 21