Inserting A Microsd Card - Mobotix Q25M Manual

102
/156
Push-push function:
insert MicroSD card,
then push until it clicks
Bayonet catch closed
Q25M Camera Manual: Installation
To use the camera without a MicroSD card, continue with step 2 in the next section.

2.8.2 Inserting a MicroSD Card

1. Insert the MicroSD card: Push the MicroSD card into the
card slot as shown, until an audible and perceptible click
indicates it is in place.
2. Mount the back plate: Replace the back plate of the
camera housing, ensuring that the back plate screw
holes are correctly positioned above the thread inserts.
3. Screw the back plate tight and replace the connec-
tion cables: Place the four Allen screws back into the
back plate and tighten the screws using the supplied
2 mm Allen wrench. The previously removed patch cable
must now be reconnected (see «Attaching the Cable
Retainer» in Section 2.2.2, «Procedure» ).
4. Attach the outer shell: Replace the outer shell and
screw all four Allen screws tight using the supplied
Allen wrench.
5. Activate recording: If you have inserted a MicroSD card
that has already been MxFFS formatted, you can activate
recording under Admin Menu > Storage on External
File Server / Flash Device. Once the camera has been
rebooted, it automatically activates recording.
6. If you have inserted a new MicroSD card, it must first be formatted as described
in Section 3.4, «MicroSD Card Recording» .
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com