Maintenance - 3D Systems iPro 8000 SLA Center User Manual

8000/9000
User's Manual

Maintenance

iPro 8000/9000 SLA Center Cleaning and Decontamination
Clean the iPro 8000/9000's inner and outer surfaces and windows periodically as described in the
following paragraphs.
iPro 8000/9000 SLA Center Surfaces
Clean the iPro 8000/9000 SLA Center's outer surfaces as needed following the following guidelines.
Dust Removal
Remove dust from the outer surfaces of the iPro 8000/9000 SLA Center by wiping with a
clean, dry, lint-free cloth.
101
Damage
If the equipment is used in a manner not specified by the manufacturer, the
protection provided by the equipment may be impaired.
Damage
Do not remove any outer panels when cleaning the iPro 8000/9000 SLA Center.
Panels must be removed only by a qualified 3D Systems Customer Support
Representative.
www.3dsystems.com
M a i n t e n a n c e
40-D043 Revision C 5-May-17