3D Systems iPro 8000 SLA Center User Manual page 118

G l o s s a r y
8000/9000
User's Manual
SmartSweep recoating process
A feature used to reduce the build times by sweeping only over that portion of the RDM where a
part is being built instead of sweeping the full area of the resin delivery module. See Sweep.
Stereolithography
A three-dimensional imaging process that forms plastic objects by solidifying successive layers of
photocurable resin.
Stereolithography file (STL)
The tessellated (triangulated) CAD input file.
Supports
Structures designed on the CAD system or by 3DManage File Preparation Software to support a
part above the elevator platform, provide a rigid foundation on which the object may be built, and
attach and support layer sections.
Sweep
A pass of the recoater blade from the front of the resin delivery module to the rear or from rear to
front. The act of removing excess resin from the upper surface of the part or adding a layer of fresh
resin during the recoat process. See Recoating and also see SmartSweep recoating process.
40-D043 Revision C 5-May-17
www.3dsystems.com
118