Service - 3D Systems iPro 8000 SLA Center User Manual

8000/9000
User's Manual

Service

General
SLA Center service procedures must be performed only by a 3D Systems-certified service
technician unless this guide explicitly states otherwise.
If your SLA Center needs service, contact 3D Systems Technical Support at the following
numbers:
• In the United States or Canada, call 800-793-3669
• In Europe, call +49-6151-357357
You can also contact your local 3D Systems representative. For material safety data sheets and
other technical support information, go to this 3D Systems' Web site address:
http://www.3dsystems.com/techsupport/index.asp
Laser
UV Radiation
SLA Center laser service procedures must be performed only by 3D Systems certified
service technicians. Attempts by non-certified personnel to perform laser
service procedures can result in serious eye damage. All SLA Center users must
observe the guidelines and warnings in
99
"Laser
Safety".
www.3dsystems.com
S e r v i c e
40-D043 Revision C 5-May-17