Troubleshooting - 3D Systems iPro 8000 SLA Center User Manual

8000/9000
User's Manual

Troubleshooting

Power Outages
If you are present when a power outage occurs, or if you discover that the main power is off,
complete the following steps:
1. Switch the power OFF at the iPro 8000/9000 SLA Center's electronic cabinet so that it does not
automatically start when the power is restored; doing so prevents damage from power flickers
and surges.
2. When the power is restored and stable, switch the iPro 8000/9000 SLA Center power ON at the
cabinet.
iPro 8000/9000 SLA Center Shutdown
If you do not plan on operating the iPro 8000/9000 SLA Center on a regular basis and want to shut it
down for an extended period of time, shut down Windows and turn off the main disconnect. See
"Electrical Cabinet: Closed
Note: It takes a substantial amount of time for the iPro 8000/9000 SLA Center to warm up
after a full shutdown/power off. See
Error Symptoms and Other Problems
"Error Symptoms" contain problems that can occur with your iPro 8000/9000 SLA Center. Please
consult the table if you have any problems.
95
Door".
Resin Delivery Module Temperature
www.3dsystems.com
T r o u b l e s h o o t i n g
40-D043 Revision C 5-May-17
Control.