Table of Contents
Advertisement
q u i c k s t a r t g u i d e
Maintenance
Cleaning the Viper Pro
Clean the Viper Pro's outer surfaces and inside the waste drawer periodically as described in the
following paragraphs.
(xx: Add caution graphic) Caution: Do not remove any outer panels when cleaning the Viper Pro.
Panels must only be removed by a qualified 3D Systems Customer Support Representative.
Cleaning Viper Pro Surfaces
Clean Viper Pro outer surfaces as needed following these guidelines:
Remove dust from the outer surfaces of the Viper Pro by wiping with a clean, dry, lint-free cloth.
Caution: dust and clean the outside surfaces only. Do not dust inside the build chamber or feed
slots.
Remove dirt and grease from the Viper Pro by spraying all-purpose cleaner on a clean cloth and
gently wiping.
Caution: use only non-abrasive, alcohol-free cleaners to clean surfaces. Do not use all-purpose
cleaners that contain petroleum-based polishing agents such as liquid wax. Spray the cleaner on
the cloth, not on the surface.
Caution!
Do not use any cleaning solvents on the build chamber window; doing so may
damage its protective coating.
60
m a i n t e n a n c e
Advertisement
Table of Contents
