3D Systems iPro 8000 SLA Center User Manual page 64

8000/9000
User's Manual
Distance: Defines the distance increment when moving the beam with the arrow buttons. To
move the beam faster, use a larger value; for finer movement, use a smaller value.
Note: Moving the beam to reach the scanner limit will result in a fatal error.
This will require the system to be restarted.
Note: When using the arrows to move the scanners, it can position the beam
within the build chamber area causing resin to cure. If left long enough, there is a
potential for the resin to burn.
64
www.3dsystems.com
S c a n n e r
40-D043 Revision C 5-May-17