3D Systems iPro 8000 SLA Center User Manual page 74

8000/9000
User's Manual
The Build Status dropdown enables you to change the units of the status of the build.
--- units can be in inches for Position.
--- percentage for Percent
--- hours, minutes, and seconds for Duration and Time (clock).
Position: Shows the position of the build status depending on original CAD Z coordinate. The
units, inches or millimeters, will be consistent with the units used in the build file.
Percent: With 0% as the start and 100% as the end, shows the percentage completed of the
current build.
Duration: With 0:00 as the start and the projected time of completion as the end, shows the time
that has elapsed at the current build.
Time: In real time, this clock shows the time that the build started, the current time, and the
projected time at the end of the build.
Note: The format of the values in the right hand column will change depending on the
dropdown selected.
74
B u i l d W i n d o w
www.3dsystems.com
40-D043 Revision C 5-May-17